ANSI-Tested Casters for Proven Safety & Performance 🚚 Free Shipping $325+ (USA)
3" X 1.25" Steel Wheel | Total Locking Swivel Caster | 300 lbs Capacity
Bulk Discounts Auto-Applied at Checkout
This listing is for a 3-inch steel wheel stem caster with a total locking brake. This total locking brake locks both the swivel raceway and the wheel at the same time. The steel wheels are gray iron wheels also known as semi-steel wheels. These steel wheels are precisely machined and have a tensile strength of 30,000 psi. The weight capacity on this 3-inch should not exceed 300 lbs per caster and steel wheels are not completely impact resistant so these should only be rolled on smooth concrete floors with no debris and should never be dropped. The temperature range on this wheel is -45 degrees Fahrenheit up to 600F. The three-inch hub design is slotted and will look similar to the photo but may not be exact due to inventory and manufacturer although we do keep a full stock and will ship the same or the next day. The other sizes in this class such as the 4-inch and 5 inches are solid hubs and do not have the ported holes as this 3-inch does. The swivel yoke that holds the wheel has a double ball bearing raceway, cold rolled gauge steel for increased strength, and is finished off with zinc plating to add protection from rust and corrosion when exposed to water or chemicals.
WHEEL DIAMETER: | 3" |
TREAD WIDTH: | 1-1/4" |
WHEEL TYPE: | STEEL |
WHEEL CAPACITY: | 300 LBS |
BEARING TYPE: | PLAIN BORE |
COLOR: | GRAY |
TEMPERATURE RANGE: | -45F TO 600F |
CASTER PLATING: | ZINC |