4" x 1 1/2" High Temp Glass - Nylon Wheel - 300 lbs Capacity

They perform best in moist heat applications such as in smokehouses, moist heat bakery and autoclave applications and around water and steam. Temperature Rating: Up to 425° F for 30 minutes MAXIMUMcontinuous operation. Then allow to cool to room temperature. If used above 425° For for more than 30 minutes of continuous operation it will reduce the life of the wheel. High Temperature Glass-Filled Nylon wheels are not recommended for dry heat applications because once the moisture content of the wheel gets to zero, the wheel will shatter.

• High-Temperature Applications
• Resistant to oil, grease, solvents.
• Easy Rolling
• Great on Concrete
• Quieter than steel wheels
• Non Marking
• Non Sparking
• Impact Resistant

Wheel Diameter:4"
Tread Width:1 1/2"
Tread Face:Flat
Durometer: 85D ± 5
Hub Length ( Width where Axle Goes Through ) :1 5/8"
Maximum Capacity: 300 lbs each
Wheel Bearing:Plain Bore - No Bearing in the Wheel
Spanner:Yes
Axle Diameter:3/8"