4" x 1-1/4" Hi-Temp Glass FiIled Nylon Wheel - 300 LBS cap

0 Reviews

Quantity Discounts:
5% Off: 50-99 pcs | 10% Off: 100-199 pcs | 15% Off: 200+ pcs

$0.00

Bulk Discounts Auto-Applied at Checkout

Usually Ships in 1 to 2 Business Days

PRODUCT CODE: HTPHW4X14

Choose your options:

BEARING TYPE:

Quantity:

4" x 1-1/4" Hi-Temp Glass-FiIled Nylon Wheel - 300 LBS cap

High Temp Glass Filled Nylon Wheels perform best in moist heat applications such as in smokehouses, moist heat bakery, and autoclave applications and around water and steam. Temperature Rating: Up to 425° F for 30 minutes MAXIMUM continuous operation. Then allow cooling to room temperature. If used above 425° For for more than 30 minutes of continuous operation it will reduce the life of the wheel. High-Temperature Glass-Filled Nylon wheels are not recommended for dry heat applications because once the moisture content of the wheel gets to zero, the wheel will shatter.

High-Temperature Glass-Filled Nylon wheels have a hard surface and should be used on smooth floor surfaces. If the floors are rough or if there are obstructions which will impact these wheels it will reduce the service life of the wheels. It is always best to shield High-Temperature Wheels from a direct heat intake source in any high-temperature application.

High-Temperature Applications
Resistant to oil, grease, solvents.
Easy Rolling
Great on Concrete
Quieter than steel wheels
Non Marking
Non Sparking
Impact Resistant

Wheel Diameter:4"
Tread Width:1 1/4"
Tread Face:Flat
Durometer: 85D ± 5
Hub Length ( Width where Axle Goes Through ) :1 9/16"
Maximum Capacity: 300 lbs each
Wheel Bearing:Top Hat Spanners
Spanner:Yes
Axle Diameter:3/8"