Polyolefin Wheel 8" X 2" - Roller Bearing - 900 LBS Capacity

0 Reviews

Quantity Discounts:
5% Off: 50-99 pcs | 10% Off: 100-199 pcs | 15% Off: 200+ pcs

$0.00

Bulk Discounts Auto-Applied at Checkout

Usually Ships in 1 to 2 Business Days

PRODUCT CODE: HDP-8X2

Choose your options:

BEARING TYPE:

Quantity:

Caster Barn's Polyolefin Caster Wheels are injection molded from a blend of thermoplastic polymers forming a one piece solid sanitary design. These Polyolefin wheels, as with Nylon wheels, are especially suited for wet and corrosive applications. They are very resistant to most commonly encountered liquids. Polyolefin wheels have a lower capacity and a more limited temperature range than Nylon wheels.

In a cold dry environment, such as a refrigerated store room, Polyolefin wheels may become brittle. They should not be used in a freezer or a heat application above 180°F intermittent usage, such as a rack washer.

Hard tread rolls easily, provides good concretefloor protection and is quieter than steel wheels.
Resistant to oil, grease & solvents, non-metallic & non-sparking.
Economically priced wheel.
Zerk fitting are not standard, but available upon request.
Durometer: 65 Shore D (+/-5).
Temperature range: -40° F to 180° F

Wheel Diameter:8"
Tread Width:2"
Tread Face:Flat
Durometer: 65D ± 5
Hub Length ( Width where Axle Goes Through ) :2 7/16"
Maximum Capacity: 900 lbs each
Wheel Bearing:3/4" Roller Bearing
Spanner:Yes
Axle Diameter:1/2"