6" x 2" Polyurethane Tread Keyed Drive Wheel
2-3/16" Hub Length | 14mm Bore Size
Industrial drive wheels are used throughout industry. The applications are varied, but all involve fixing a wheel to a shaft. The most common means of securing a wheel to a shaft is with a key-way and/or setscrews. Other set-ups include tapered locking bushing, welding, interference fit, nuts and bolts, and cotter pins.
Keyways can be machined in most wheel sizes. The wheel hub diameter must be large enough to allow 1/4” of metal between the hub outside diameter and the bottom of the keyway. Because of the extra stress involved with keyed wheels, capacity ratings should be reduced by 75% and our normal warranty does not apply. When ordering, please specify shaft size as well as the width and depth of desired keyway. The chart at right shows the standard keyway dimensions in relation to the shaft diameter.Set screws are also available. Unless otherwise specified, if one set screw is desired it will be placed over the key-way. If two, the second will be at 90° from the key-way.
This listing of for a 6" Diameter Polyurethane Drive Wheel x 2" Tread Width (5x2 wheel shown in photo).
Questions? Please Call us @ 844-439-4335 or Contact Us Here
For quick online service please email us: [email protected] and a Caster Expert will help you answer any questions.
Due to the vast amount of Key-way Options and Wheel Sizes we Manufacture these Drive Wheels upon order.
Our lead-time for all Drive Wheels regardless of quantities ordered will normally take 1-2 Weeks to ship from when the order was placed.
