8" x 2" Scaffolding Caster Set of 4 with Total Lock Brakes - Mold-on-Rubber Cast Iron Wheel
Listing is for a Set of 4 CasterHQ 8 Inch Scaffolding Casters. Industry Standard 1-3/8" x 4" with 1/2" Cross-drilled hole - 2-1/2" up from base. These casters are Universal replacements for most Rolling Scaffolding units. All of CasterHQ's Scaffolding Casters come with Steel Thread Guards as a standard upgrade to extend the life of the wheel, bearings, and prevent dust and debris from interfering with the roller bearing. Each Caster is rated at 500 lbs capacity. Brakes are easy to engage and disengage, brakes are total locking which means the wheel and the swivel will both lock simultaneously when the brakes are engaged. Grease fitting included in Swivel Raceway and a Zerk axle is provided for easy access points to grease the wheels roller bearing. Finish is a bright zinc plating which helps prevent rust opposed to standard un-plated steel. Many painters use scaffolding equipment as well as theatrical motion picture equipment, and of course the construction industry. Scaffolding Casters allow you to change your stationary platform into a mobile platform with easy maneuverability.
- Capacity: 500 lbs each caster - 2,000 lbs per set of 4
