Pacer Hooded Caster - Flat Black 50mm Diameter | Urethane Tread | 5/16" x 1-1/2" Grip Neck Stem | 75 lbs load Capacity per caster
The Pacer Series is a sleek modern looking caster that comes with a 5/16" x 1-1/2" Grip Neck Stem. This listing is for one piece (1) of a Pacer Part#: PPA50302FB Grip Neck Stem Casters are commonly referred to as wood stem casters. These casters are made to mount in wood furniture. Grip neck Stem Casters almost always need to be used with a metal wood socket before installing in wooded furniture. These metal sockets have teeth at the base with a hollow tube that is meant to be inserted inside the wood to allow you to mount the casters. The spikes on the bottom of the socket are meant to be hammered into the furniture after the hole is drilled into the furniture for the socket to be inserted appropriately. After the metal socket is inserted into the furniture, you will use these Grip Neck Stem casters as seen below to insert into the metal socket, these casters will pop into the sockets, and no further adjustments will be needed. Then your furniture will now be safely outfitted with a furniture caster. Long story short, These casters need a socket that would be permanently fixed to the unit you are planning to mount the caster to. This will allow the grip neck stem caster to quickly and safely pop into place.
Technical Specifications:
Wheel Diameter: 50mm
Mounting Height: 2-3/8"
Swivel Radius: 1-3/4"
Finish Type: Flat Black
Dynamic Load Capacity: 75 lbs per caster
Mounting Type: Grip Neck Stem
Mounting Stem Dimensions: 5/16" Diameter x 1-1/2" Long
The most commonly used Socket used in conjunction with these casters can be purchased here.
![Socket#: SR2402ZN-M36 | Metal Socket for Wood Furniture | Fits 5/16" x 1-1/2" Grip Neck Stem Caster]()
