The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Under 350 lbs. each
351–675 lbs. each
676–1,250 lbs. each
1,251–2,000 lbs. each
2,001–4,000 lbs. each
4,001–7,500 lbs. each
7,501–10,000 lbs. each
10,001–15,000 lbs. each
15,001–20,000 lbs. each
20,001–30,000 lbs. each
30,000+ lbs. each

Colson Floor Protective Rubber Total Lock Threaded Stem Casters

Diameter: 3-1/2, 4, 5 inTread: 1-1/4 inCapacity: up to 325 lbStem: threaded

22 Series (Supports Up To 325 Lb Per Cas rubber casters sized for carts that must lock wheel and swivel together. You will see wheel diameters 3-1/2, 4, 5 in, rubber treads, and threaded-stem and plate-mount frames across the SKUs listed below. Bring plate and stem measurements when replacing unmarked casters so the new corners sit level. Stay inside the Colson catalog when you need matched series documentation.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Colson Floor Protective Rubber Total Lock Threaded Stem Casters