4:35
How to Choose the Perfect Caster & Wheel for Any Application
A fast, structured method for matching a caster and wheel to your equipment weight, operating surface and environment. Good starting point before a bulk order.
Installation tutorials, buying guides, brake comparisons and wheel-material specs — built by the engineers who sell the parts.
51 videos covering how to choose, measure, install and replace casters, wheels and dollies. Every video is grouped by subject so engineers, MRO buyers and procurement teams can find the exact answer fast — then spec the right part with confidence.
12:52
The complete primer on selecting a caster: load capacity, floor type, environment, mount style and wheel material. If you watch one video before specifying a part, make it this one.
Watch the Buyers Guide →Buying guides that walk through capacity, floor surface, mount type and wheel material — plus how to measure an existing caster so the replacement fits the first time.
4:35
A fast, structured method for matching a caster and wheel to your equipment weight, operating surface and environment. Good starting point before a bulk order.
12:52
The full reference: choosing the right wheel for a tool box, cart or piece of equipment by capacity, floor and duty cycle. The most-watched guide in the library.
11:43
The four measurements that define a caster — mount type, stem or bolt pattern, wheel diameter and mounting height — so you order an exact match.
Step-by-step installation tutorials for stem casters, plate casters, caster pads, roller bearings and mounting hardware — including how to add casters to equipment that never had them.
5:15
How to size and seat an expanding stem caster into round tubing, including matching the expander to your tube inside diameter.
2:09
Weld-on and bolt-on caster pads let you add casters to equipment with no existing mounting surface. Full install walkthrough.
4:16
How to add casters to wire shelving units — fits all major wire rack brands. Covers stem sizing and the install sequence.
2:49
Mobilize a stainless steel prep table with the correct plate or stem casters for a commercial kitchen environment.
2:38
Press and seat a roller bearing inside a caster wheel hub for smoother rolling and longer life under load.
2:56
Use steel shims and caster plates to correct uneven floors and level equipment before the casters go on.
3:27
Carriage bolts vs. slotted hex bolts for mounting plate casters — which fastener to use, and why it matters under load.
Removing, replacing and upgrading chair casters — including self-braking casters and adding wheels to furniture that shipped without them.
4:43
The full install video for swapping standard office chair casters: removal, stem sizing and fitting the replacements. The most-viewed video on the channel.
10:21
How to upgrade an office chair to self-braking casters that lock when the chair is unweighted — useful on hard floors and slopes.
8:51
How to add casters to chairs and furniture that did not ship with them, including the stem and socket options that fit most legs.
2:51
A quick walkthrough for replacing worn or noisy chair wheels with smoother-rolling, floor-safe caster upgrades.
Brake and lock comparisons — total-lock vs. top-lock, stem-mount brakes, and swivel locks — so you spec the holding force the application actually requires.
2:19
The difference between total-lock and top-lock brake casters, and when each brake type is the correct spec for your equipment.
3:27
How a total locking caster brake works, and why it holds equipment more securely than a standard side brake.
6:51
Total locking brakes in a stem configuration — how the brake holds both swivel and wheel on stem-mount equipment.
3:54
How a swivel lock converts a swivel caster into a temporary rigid caster for straight-line tracking on long pushes.
Retractable leveling casters let you roll equipment into position, then drop a foot to lock it level and stationary. These walkthroughs cover operation and install.
11:14
A full walkthrough of the updated retractable leveling caster: roll the equipment, then drop the foot to lock it level in place.
2:43
An overview of retractable leveling caster options and how to pick the right load rating and foot type for your equipment.
1:51
The original full tutorial on how retractable leveling casters mount, roll and lock equipment level on the floor.
Tread and core material decides capacity, floor protection, noise and heat tolerance. These videos break down polyurethane, phenolic, rubber, TPR and high-temp wheels.
6:40
Polyurethane tread on a cast iron core — the workhorse wheel for heavy loads on rough industrial floors.
6:02
Polyurethane tread bonded to an aluminum core — a lighter high-capacity wheel for demanding rolling applications.
9:16
Specs and use cases for blue solid polyurethane caster wheels: load capacity, floor protection and roll resistance.
5:26
Where phenolic wheels fit: high load capacity, hard floors and moderate heat at a low price point.
3:07
Everything you need to know about TPR wheels: quiet, non-marking, and where their static-load limits matter.
6:33
How mold-on rubber wheels are constructed, their quiet ride, and where they outperform other tread types.
12:01
How high-temp caster wheels are rated and where they belong: ovens, bakeries, kilns and heat-treat lines.
3:54
Food-safe, high-temperature casters and wheels built for bakery racks, proofers and oven carts.
0:26
High-temp wheel options for commercial bun pan racks used in industrial ovens and bakeries.
US-based caster engineers will confirm load capacity, mount type and wheel material for your exact application.
Call 844-439-4335 Get Engineering HelpTire-type comparisons for casters that run outdoors or over rough ground — cushioning, maintenance and which tire to spec for your terrain.
18:23
An in-depth comparison of all three caster tire types across cushioning, capacity and ongoing maintenance.
4:21
The core trade-offs between flat-free and air-filled caster tires, and how to choose for your equipment.
2:09
A short, direct comparison of flat-free and pneumatic caster tires — ride quality vs. zero-maintenance.
Platform dollies, oak furniture dollies, hand trucks, tilt trucks and pallet jack accessories — how they are built and how to operate them.
19:29
A side-by-side comparison of USA-made oak furniture dollies against budget imports, with a full buyers guide.
0:33
A USA-made 1,400 lb capacity 6-wheel platform dolly built to roll over thresholds, floor gaps and rough ground.
0:30
Using a 1,600 lb capacity safe and appliance dolly to move heavy, awkward loads quickly and safely.
8:00
A look at how USA-made hardwood furniture and moving dollies are built, and why the wood and wheels matter.
0:36
The Traverse 6-wheel dolly — an all-terrain platform dolly designed to conquer uneven ground.
1:36
How to use a 2-in-1 convertible hand truck that switches between upright dolly and 4-wheel cart modes.
3:15
An overview of heavy duty tilt trucks for moving and dumping bulk material in plants and warehouses.
2:17
The pallet jack stop accessory that keeps a pallet jack or pallet truck from rolling away when parked.
Application-specific walkthroughs — retail fixtures, prep tables, gates, shopping carts, mop buckets, drywall carts and barn doors — plus why the wrong caster becomes a costly failure point.
3:11
Why the wrong caster on critical equipment becomes a single point of failure for an entire operation.
12:44
How a spring-loaded gate wheel supports a sagging gate and lets it roll smoothly over uneven ground.
19:42
Diagnosing and replacing worn shopping cart wheels and casters to restore smooth, quiet rolling.
7:04
Step-by-step replacement of janitorial mop bucket wheels and casters that have seized or worn flat.
3:39
Heavy duty replacement casters and wheels for sheetrock and drywall carts that carry concentrated loads.
8:01
How to spec low-profile, easy-rolling casters for retail displays and movable store fixtures.
8:17
What to look for in a prep table caster before you buy — capacity, brake type and floor fit.
3:31
How to use V-groove wheels to build barn door hardware that rolls on angle-iron track.
A look at the people and facility behind the parts — the Mansfield, Texas warehouse and showroom where CasterHQ builds and ships material handling equipment.
1:05
A short warehouse tour showing how CasterHQ builds and ships caster and material handling equipment.
3:06
A walk through the CasterHQ warehouse and showroom in Mansfield, Texas.
Every video in this library was produced by CasterHQ — a B2B industrial caster and material handling supplier based in Mansfield, Texas, with 30 years of caster expertise. The same US-based engineers who appear in these videos answer the phone at 844-439-4335. Content reviewed by Jordan Wilson, Industrial Caster Specialist, on May 15, 2026.
Browse casters, wheels and dollies, or talk to an engineer before you order. In-stock orders ship same day when placed by 3 PM CT.
Shop Casters & Wheels Call 844-439-4335