Up to 350 lbs
Up to 7,000 lbs
Up to 16,000 lbs
Up to 40,000 lbs
Shock absorbing
Outdoor / rough terrain
View All Specialty Casters
Browse all specialty caster types
All measurements indicate the wheel diameter by the tread width.
The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.
Round Folding Table Mover5 tables · to 1,600 lbThe standard for ballroom resets.✓ 32-3/4" wide, needs a 36" or double doorView This Model →
Tables + chairs, one trip?
Combo Mover 37805 tables + 20 chairsFull room reset in a single trip.✓ 32-3/4" wide, needs a 36" or double doorView This Model →
Folded chairs in volume?
Hanging Storage Truck 900LUp to 60 chairsMoves and stores them between events.✓ 31-5/8" wide, needs a 36" or double doorView This Model →
Lifetime brand chairs?
Compact Truck 920 / 920LStandard or Lifetime railsSized for how Lifetime chairs hang.✓ 31-5/8" wide, needs a 36" or double doorView This Model →
Stacked chairs, not folded?
Stacked Chair Dolly 560Universal fitRolls the whole stack without unstacking.✓ 22" wide, fits every doorwayView This Model →
One table, one person?
Round Table Toter R14’ and 5’ roundsGrab-and-go for single-table moves.✓ 29" wide, fits 32" doors and upView This Model →
Filter & Sort


Count what one trip must carry, then match the mover: tables ride on edge, folded chairs hang, stacked chairs ride dollies.
For gym floors, spec the non-marring poly casters and check the wheel durometer before anything rolls over a finished maple court. Hard phenolic concentrates load and can dent the finish; a softer poly tread spreads it. One storage truck saves labor only if it fits the storage room door, measure that opening before you pick between full-size and compact hanging trucks.
Hanging storage trucks carry 36 to 60 folded chairs depending on model. Chair totes carry 24 to 32, and the Model 750 folding chair dolly moves 10. For stacked chairs, Models 500, 550, and 560 move a full stack without unstacking.
Yes. Models 900L, 915L, 920L, and 935L are built specifically for Lifetime folding chairs, which hang differently than standard steel folding chairs. Standard models fit conventional folding chairs.
The Round Toter R1 handles 4' and 5' rounds, and the 3707 and 3753 XL movers carry standard 60" banquet rounds, five per trip on edge, rated to 1,600 lb total.
Yes, when configured with the non-marring poly options. They roll quietly and will not leave marks on wood courts or finished ballroom floors. Tell us the floor type at 844-439-4335 and we will confirm the right wheel before you order.
A dolly rolls under a stack of stacked chairs. A tote is a low frame that folded chairs stand in, 24 to 32 at a time. A hanging storage truck suspends folded chairs on rails, 36 to 60 per truck, and doubles as permanent storage between events.
Sources: chair specifications at lifetime.com; manual handling guidance per OSHA; engineering drawings at raymondproducts.com.
Raymond table and chair movers turn banquet teardown into a one-person job: round folding table movers rated to 1,600 lb carry five tables per trip, and hanging chair storage trucks hold up to 60 folded chairs, including models sized for Lifetime brand chairs. Built for schools, churches, hotels, and event venues, made in USA since 1958 with a lifetime warranty.
Equipping a venue or district? Request a bulk quote or call 844-439-4335 and we will size the fleet to your room counts.
Search
