Back to Casters

ATX Off-Road Wheels: Outdoor & Rough Terrain

This collection holds ATX Off-Road Wheels with rubber, polyolefin and polyurethane treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection range from 200 to 400 lb per wheel. Wheels in this category range from 4 up to 8 inches in diameter with a 2 in tread width. Rubber wheels are quiet, cushion the load, and protect floors. Polyolefin is light, low cost, and resists water and many chemicals. It is hard, so it is loud on rough floors. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Soft rubber or TPR is the better pick when the floor has chips or grit. Common uses include food service, bakeries, hospitals, schools, laboratories, and material handling carts. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Rubber aisle: rubber casters. Caster hub: heavy duty casters.

ATX Off-Road Wheels: buying guide

ATX wheels with a solid black thermo rubber tread on a polyolefin hub, 4 to 8 x 2 in, rated 200 to 400 lb each, for carts that run on dirt, grass and rough pavement.

4 to 8 x 2 in200 to 400 lbSolid tread, no flats

Shop ATX Off-Road Wheels

Sizes

Wheel Listed rating
4 x 2 in 200 lb
5 x 2 in 250 lb
6 x 2 in 350 lb
8 x 2 in 400 lb

From product titles and fields [S1]. Thermo rubber on polyolefin, -20 to 160°F.

Where ATX wheels work

Thermo rubber is softer than polyurethane or polyolefin, so it grips and cushions on dirt, grass, gravel paths and broken concrete. On soft sand or deep mud, a larger wheel sinks less, so go up to the 8 in size where the cart allows it.

Limits

  • These are wheels only. Check that the hub length and bore fit your axle and fork; the 6 in wheel lists a 2-1/4 in hub.
  • Rubber treads roll harder than hard wheels on smooth floors.
  • Keep below the listed 160°F.

ATX wheel questions

What sizes are ATX wheels?

4, 5, 6 and 8 in diameters, all 2 in wide.

Can ATX wheels go flat?

No. The thermo rubber tread is solid.

How much can an ATX wheel carry?

From 200 lb (4 in) to 400 lb (8 in) per wheel.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.

Search