Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery & High Temperature Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
Home › Industries › Laundry & Linen
Laundry casters take a beating from moisture, heat, and chemicals across commercial and industrial wash floors, moving linen trucks, laundry carts, and dryer-adjacent equipment. The spec centers on corrosion resistance and sealed bearings that survive detergent, bleach, and steam, plus heat tolerance near dryers. CasterHQ specifies stainless and zinc casters with sealed bearings, washdown-ready tread, and high-temp options for this environment, all in stock and priced for same-day shipping.
Bearings are what kill laundry casters, not the wheel. Detergent and steam wash the grease out of an unsealed bearing and it seizes. We spec sealed bearings and stainless or zinc rigs for wash-floor equipment so moisture and chemistry stay out of the raceway, which is the difference between a caster that lasts a year and one that lasts five.
Bob Camp, Caster Application Specialist, 45+ years
Our team specs laundry & linen casters by load per caster, floor and environment, mount, and any compliance the application demands, then confirms fit before you order. We stock the range for same-day shipping from Mansfield, Texas, so replacements do not stall your equipment.
Stainless steel rigs with sealed bearings resist detergent, bleach, and softener corrosion. Zinc is a lower-cost option for lighter moisture exposure away from harsh chemistry.
Yes. Sealed bearings keep moisture and chemicals out of the raceway, which is the most common failure point on wash-floor equipment. It is the single highest-value upgrade here.
Equipment adjacent to dryers should use high-temperature wheels rated above ambient, since standard poly degrades under sustained radiant heat.
Most linen and laundry carts use 4 to 5 in casters rated to roughly 300 to 500 lb each. Bulk trucks step up to 5 to 6 in kingpinless for heavier loads.
Polyurethane and thermoplastic treads are non-marking on sealed floors while resisting moisture. Match tread to floor if appearance in front-of-house areas matters.
Yes. We carry a deep stainless caster range with sealed bearings and multiple tread options, in stock for same-day shipping.
Standards & references: OSHA workplace safety resources · ASTM B117 salt-spray corrosion test · NSF/ANSI sanitation references
