Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery Oven Rack Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
Capacity shown is per caster (per wheel for wheels).
Metal wheels in gray iron semi-steel, ductile steel and machined steel for heavy, hot and rough work. They give the highest ratings here but no floor protection.
| Family | Sizes here | Rated load | Listed temperature |
|---|---|---|---|
| Gray iron / semi-steel | 2-1/2 to 12 in | About 300 to 5,500 lb | Often about -45 to 600°F |
| Ductile iron | 3 to 12 in class | About 250 to 6,000 lb | Toward 800°F on many listings |
| Forged steel (HQ Made-in-USA) | 6 to 10 in common | About 1,400 to 10,000 lb | High-heat capable; check listing |
Product fields and titles [S1]. SEO band updated to include forged 10,000 lb class verified in titles.
Flat metal wheels roll on floors. V-groove wheels ride inverted angle-iron track. Track wheels live on cast iron V-groove track wheels.
Related: gray iron semi-steel · high temperature wheels · caster wheels · industrial casters
From about 250 lb on small gray iron to 10,000 lb on HQ forged steel wheels on this page.
Semi-steel covers many plant loads and about 600°F service at a lower cost. Forged steel is the step for higher capacity and severe impact.
They can mark and wear finished floors. Use polyurethane or TPR on coated or decorative floors.
About 2-1/2 to 12 in across the metal families on this page.
