Up to 350 lbs
Up to 7,000 lbs
Up to 16,000 lbs
Up to 40,000 lbs
Shock absorbing
Outdoor / rough terrain
View All Specialty Casters
Browse all specialty caster types
All measurements indicate the wheel diameter by the tread width.
The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.
Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery & High Temperature Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
Home › Industries › Furniture & Fixtures
Furniture casters move seating, tables, cabinets, and display fixtures while protecting finished floors and matching the look of the piece. Appearance and floor protection lead the spec here, alongside smooth quiet rolling and appropriate locking. Most furniture uses light to medium-duty stem or plate casters with soft non-marking tread; heavier movers and dollies step up capacity. CasterHQ stocks decorative, floor-protective, and grip-ring stem casters plus furniture dollies, priced and in stock.






Match the tread to the floor the furniture actually sits on, not the warehouse. A hard wheel that rolls fine on concrete will dent a hardwood showroom floor and drag on plush carpet. On hard finished floors we spec a soft non-marking tread, and on carpet we go firmer so the piece rolls instead of plowing.
Bob Camp, Caster Application Specialist, 45+ years
Our team specs furniture & fixtures casters by load per caster, floor and environment, mount, and any compliance the application demands, then confirms fit before you order. We stock the range for same-day shipping from Mansfield, Texas, so replacements do not stall your equipment.
Soft, non-marking polyurethane or rubber tread spreads load and avoids denting or scuffing. On hard finished floors, a softer tread is the safe default for furniture.
A firmer, larger-diameter wheel rolls on carpet instead of plowing into the pile. Twin-wheel designs also help furniture track smoothly on soft floors.
A grip-ring stem uses a friction ring that snaps into a round socket, common on furniture and light equipment. Match the stem diameter and length to the frame socket.
Yes. We stock decorative twin-wheel and finished-cap casters that carry the load while matching the appearance of visible furniture and displays.
Most task chairs use 2 in twin-wheel stem casters. Confirm the stem diameter and whether the base takes a grip-ring or threaded stem before ordering.
Yes. We stock heavy-duty furniture and equipment dollies, including USA-made oak platforms, rated for moving cabinets, appliances, and large furniture.
Standards & references: BIFMA furniture standards · ANSI standards store · ASTM tread and durometer references
Search
