Back to Casters

P&H 10 Series Casters · Up to 150 lb

This collection holds 10 Series casters with TPR and polyurethane wheels, built for light carts, racks, and stands. Casters in this collection range from 120 to 300 lb per caster. Wheels in this category are 3 inches in diameter with a 1 in tread width. The collection includes swivel and rigid models. Thermoplastic rubber (TPR) is quiet, will not mark floors, and rolls over chips and grit. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Soft rubber or TPR is the better pick when the floor has chips or grit. Common uses include food service, bakeries, hospitals, schools, laboratories, and material handling carts. Threaded stem, grip-ring, and expanding rubber stems for round and square tubing all appear on light-duty builds. Match the stem size and thread before you order. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. TPR aisle: tpr casters. Wheel hub: replacement wheels.

P&H 10 series casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Polyolefin 3 and 4 in 150 to 300 lb -20°F to 140°F wet and chemical areas, light to medium loads
TPR Polyolefin 1.97, 2, 2-1/2 and 3 in 150 lb -20°F to 140°F non-marking, quiet on finished floors
Rubber Polyolefin 2 and 3 in 150 lb -20°F to 140°F cushioned and quiet on finished floors

Ratings are for single casters of P&H 10 series casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
1.97 x 0.94 in TPR 150 lb
2 x 13/16 in rubber and TPR 150 lb
2-1/2 x 13/16 in TPR 150 lb
3 x 1 in polyolefin, TPR and rubber 150 lb
4 x 1 in polyolefin 200 lb
4 x 1-1/4 in polyolefin 300 lb

Choosing P&H 10 series casters

  1. Load: divide the loaded weight by three for a four-caster cart [S2]. Among P&H 10 series casters, a 150 lb caster then suits about 450 lb, and the strongest at 300 lb about 900 lb.
  2. Stem: the most common stem on P&H 10 series casters is 27/32 in; 18mm in and 1/2-13 x 2-1/2 in also appear; check the old stem with calipers before ordering.
  3. Floor: on P&H 10 series casters, TPR and rubber are kinder to tile and finished floors; polyolefin rolls easier under heavy loads on smooth concrete.
  4. Rig: swivel P&H 10 series casters are listed, with side lock brake options.

P&H 10 series casters questions

How much weight can P&H 10 series casters carry?

Single P&H 10 series casters are rated 150 to 300 lb.

What stem do P&H 10 series casters use?

Most P&H 10 series casters list 27/32 in. Others: 18mm in and 1/2-13 x 2-1/2 in.

What wheel material is most common on P&H 10 series casters?

Polyolefin leads on P&H 10 series casters, rated 150 to 300 lb per caster. Among P&H 10 series casters, tpr is next at 150 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search