Back to Casters

6" x 2" Phenolic Casters

This collection holds 6 in x 2 in Phenolic Casters, built for shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 800 to 1,400 lb per caster. Wheels in this category range from 4 up to 8 inches in diameter with a 2 in tread width. The collection includes rigid models. Kingpinless swivels hold up better under shock and repeat loads. Phenolic rolls easily on smooth floors and handles dry heat, oil, and grease, but it is not made for water or washdown. It suits warehouse carts, toolboxes, and tool carts, and it is loud on rough floors. Semi steel (gray iron) rolls with low effort and shrugs off debris. It is loud and can mark finished floors. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Phenolic aisle: phenolic casters. Wheel hub: replacement wheels.

Shop by wheel material

2 types

Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →

Albion 6 x 2 in phenolic casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Phenolic 4, 6 and 8 in 800 to 1,400 lb Up to 250°F hard and easy rolling on smooth, dry floors
Cast iron 4 and 6 in 1,000 to 1,400 lb Up to 800°F heat, chips and heavy loads on rough floors

Ratings are for single casters of Albion 6 x 2 in phenolic casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
4 x 2 in cast iron and phenolic 800 to 1,000 lb
6 x 2 in phenolic and cast iron 1,200 to 1,400 lb
8 x 2 in phenolic 1,400 lb

Choosing Albion 6 x 2 in phenolic casters

  1. Load: divide the loaded weight by three for a four-caster cart [S2]; at 1,400 lb each, Albion 6 x 2 in phenolic casters suit a loaded cart of about 4,200 lb.
  2. Mount: most Albion 6 x 2 in phenolic casters use a 4 x 4-1/2 in top plate; check the bolt spacing on your frame against the plate size.
  3. Floor: on Albion 6 x 2 in phenolic casters, phenolic and cast iron suit smooth concrete and heavy loads, but are loud and hard on tile and wood.
  4. Rig: swivel and rigid Albion 6 x 2 in phenolic casters are listed, with face contact brake options.
  5. Heat: among Albion 6 x 2 in phenolic casters, the highest listed range is up to 800°F on cast iron; check the temperature field on each listing before oven or hot-room use.

Albion 6 x 2 in phenolic casters questions

How much weight can Albion 6 x 2 in phenolic casters carry?

Single Albion 6 x 2 in phenolic casters are rated 800 to 1,400 lb; most fall between 1,000 and 1,400 lb.

What top plate do Albion 6 x 2 in phenolic casters use?

Most Albion 6 x 2 in phenolic casters use 4 x 4-1/2 in.

What wheel material is most common on Albion 6 x 2 in phenolic casters?

Phenolic leads on Albion 6 x 2 in phenolic casters, rated 800 to 1,400 lb per caster. Among Albion 6 x 2 in phenolic casters, cast iron is next at 1,000 to 1,400 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search