Back to Casters

28 Series

This collection holds 28 Series casters with ergonomic polyurethane, rubber and nylon wheels, built for shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 1,200 to 1,500 lb per caster. Wheels in this category range from 6 up to 8 inches in diameter with a 2 in tread width. The collection includes swivel, rigid, and brake models. Ergonomic polyurethane wheels are made to lower push effort, which helps workers move heavy carts by hand. Rubber wheels are quiet, cushion the load, and protect floors. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. Softer polyurethane or soft rubber or TPR tread is the better pick when the floor has chips or grit. Match plate size, bolt pattern, and overall height before you order. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Polyurethane aisle: polyurethane casters. Wheel hub: replacement wheels.

Shop by wheel material

3 types

Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →

Albion 28 series casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Polyurethane Aluminum and Cast iron 6 and 8 in 1,250 to 1,500 lb -40°F to 180°F quiet, floor-friendly and long wearing
Rubber 6 and 8 in 450 to 600 lb -45°F to 180°F cushioned and quiet on finished floors
Nylon 6 and 8 in 1,200 to 1,400 lb Up to 180°F low rolling effort on smooth floors, handles wet areas

Ratings are for single casters of Albion 28 series casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
6 x 2 in polyurethane, rubber and nylon 450 to 1,500 lb
8 x 2 in polyurethane, rubber and nylon 600 to 1,500 lb

Choosing Albion 28 series casters

  1. Load: divide the loaded weight by three for a four-caster cart [S2]; at 1,500 lb each, Albion 28 series casters suit a loaded cart of about 4,500 lb.
  2. Mount: most Albion 28 series casters use a 4 x 4-1/2 in top plate; check the bolt spacing on your frame against the plate size.
  3. Floor: on Albion 28 series casters, polyurethane and rubber are kinder to tile and finished floors; nylon rolls easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid Albion 28 series casters are listed, with face contact brake options.

Albion 28 series casters questions

How much weight can Albion 28 series casters carry?

Single Albion 28 series casters are rated 450 to 1,500 lb; most fall between 1,200 and 1,500 lb.

What top plate do Albion 28 series casters use?

Most Albion 28 series casters use 4 x 4-1/2 in.

What wheel material is most common on Albion 28 series casters?

Polyurethane leads on Albion 28 series casters, rated 1,250 to 1,500 lb per caster. Among Albion 28 series casters, rubber is next at 450 to 600 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search