Back to Casters

Albion 310 series casters

This collection holds 310 Series casters with semi steel, polyurethane and phenolic wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection range from 2,500 to 3,500 lb per caster. Wheels in this category range from 6 up to 12 inches in diameter with a 3 in tread width. The collection includes swivel, rigid, and brake models. Kingpinless swivels hold up better under shock and repeat loads. Semi steel (gray iron) rolls with low effort and shrugs off debris. It is loud and can mark finished floors. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Phenolic rolls easily on smooth floors and handles dry heat, oil, and grease, but it is not made for water or washdown. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Semi steel aisle: semi steel casters. Wheel hub: replacement wheels.

Shop by wheel material

2 types

Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →

Albion 310 series casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Phenolic 8, 10 and 12 in 2,500 to 3,500 lb Up to 250°F hard and easy rolling on smooth, dry floors
Cast iron 6, 8, 10 and 12 in 2,000 to 3,500 lb -40°F to 180°F heat, chips and heavy loads on rough floors
Polyurethane Cast iron 6, 8, 10 and 12 in 2,000 to 3,500 lb -40°F to 180°F quiet, floor-friendly and long wearing

Ratings are for single casters of Albion 310 series casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
6 x 3 in cast iron and polyurethane 2,000 lb
8 x 3 in phenolic, cast iron and polyurethane 2,500 to 3,000 lb
10 x 3 in phenolic, polyurethane and cast iron 2,900 to 3,000 lb
12 x 3 in phenolic, cast iron and polyurethane 3,500 lb

Choosing Albion 310 series casters

  1. Load: plan on three casters carrying a four-caster cart [S2]; Albion 310 series casters rated 3,500 lb each then carry about 10,500 lb.
  2. Mount: most Albion 310 series casters use a 4-1/2 x 6-1/4 in top plate; 3-3/8 x 5-1/4 in plates are listed too; measure bolt hole centers on the old plate and compare.
  3. Floor: on Albion 310 series casters, polyurethane is kinder to tile and finished floors; phenolic and cast iron roll easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid Albion 310 series casters are listed, with side lock brake and face contact brake options.

Albion 310 series casters questions

How much weight can Albion 310 series casters carry?

Single Albion 310 series casters are rated 2,000 to 3,500 lb; most fall between 2,500 and 3,500 lb.

What top plate do Albion 310 series casters use?

Most Albion 310 series casters use 4-1/2 x 6-1/4 in. Other plates on Albion 310 series casters: 3-3/8 x 5-1/4 in.

What wheel material is most common on Albion 310 series casters?

Phenolic leads on Albion 310 series casters, rated 2,500 to 3,500 lb per caster. Among Albion 310 series casters, cast iron is next at 2,000 to 3,500 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search