Back to Casters

Albion Maintenance-Free 38 Series Casters · Up to 2,500 lb · 6"–10" · Polyurethane & Cast Iron

This collection holds 38 Series Maintenance Free casters with ergonomic polyurethane, nylon and semi steel wheels, built for shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 1,500 to 2,500 lb per caster. Wheels in this category range from 6 up to 10 inches in diameter with a 2 in tread width. The collection includes swivel, rigid, and brake models. Ergonomic polyurethane wheels are made to lower push effort, which helps workers move heavy carts by hand. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. Semi steel (gray iron) rolls with low effort and shrugs off debris. It is loud and can mark finished floors. Match plate size, bolt pattern, and overall height before you order. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Polyurethane aisle: polyurethane casters. Wheel hub: replacement wheels.

Shop by wheel material

2 types

Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →

Albion maintenance-free 38 series casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Polyurethane Aluminum and Cast iron 6, 8 and 10 in 1,250 to 2,500 lb -40°F to 180°F quiet, floor-friendly and long wearing
Nylon 6 and 8 in 1,250 to 2,160 lb -30°F to 220°F low rolling effort on smooth floors, handles wet areas

Ratings are for single casters of Albion maintenance-free 38 series casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
6 x 2 in polyurethane and nylon 600 to 2,160 lb
8 x 2 in polyurethane and nylon 1,500 to 2,200 lb
10 x 2 in polyurethane 2,500 lb

Choosing Albion maintenance-free 38 series casters

  1. Load: divide the loaded weight by three for a four-caster cart [S2]. Among Albion maintenance-free 38 series casters, a 2,200 lb caster then suits about 6,600 lb, and the strongest at 2,500 lb about 7,500 lb.
  2. Mount: most Albion maintenance-free 38 series casters use a 4-1/2 x 6-1/4 in top plate; measure bolt hole centers on the old plate and compare.
  3. Floor: on Albion maintenance-free 38 series casters, polyurethane is kinder to tile and finished floors; nylon rolls easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid Albion maintenance-free 38 series casters are listed, with face contact brake and side lock brake options.

Albion maintenance-free 38 series casters questions

How much weight can Albion maintenance-free 38 series casters carry?

Single Albion maintenance-free 38 series casters are rated 1,250 to 2,500 lb; most fall between 1,500 and 2,200 lb.

What top plate do Albion maintenance-free 38 series casters use?

Most Albion maintenance-free 38 series casters use 4-1/2 x 6-1/4 in.

What wheel material is most common on Albion maintenance-free 38 series casters?

Polyurethane leads on Albion maintenance-free 38 series casters, rated 1,250 to 2,500 lb per caster. Among Albion maintenance-free 38 series casters, nylon is next at 1,250 to 2,160 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search