Back to Casters

6" x 3" Polyurethane Casters

This collection holds 6 in x 3 in Polyurethane Casters with semi steel, polyurethane and nylon wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection range from 2,000 to 7,200 lb per caster. Wheels in this category range from 6 up to 12 inches in diameter with a 3 in tread width. The collection includes swivel and rigid models. Kingpinless swivels hold up better under shock and repeat loads. Dual wheel casters split the load over two wheels and swivel with less effort under heavy loads. Semi steel (gray iron) rolls with low effort and shrugs off debris. It is loud and can mark finished floors. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Semi steel aisle: semi steel casters. Wheel hub: replacement wheels.

Shop by wheel material

2 types

Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →

Albion 6 x 3 in polyurethane casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Polyurethane Cast iron 6 and 8 in 2,000 lb -40°F to 180°F quiet, floor-friendly and long wearing
Nylon 6 and 8 in 2,000 to 7,200 lb -30°F to 220°F low rolling effort on smooth floors, handles wet areas
Cast iron 12 in 4,100 lb -40°F to 180°F heat, chips and heavy loads on rough floors

Ratings are for single casters of Albion 6 x 3 in polyurethane casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
6 x 3 in polyurethane and nylon 2,000 to 7,200 lb
8 x 3 in polyurethane and nylon 2,000 lb
12 x 3 in cast iron 4,100 lb

Choosing Albion 6 x 3 in polyurethane casters

  1. Load: plan on three casters carrying a four-caster cart [S2]; at 4,100 lb each, a common rating here, that is about 12,300 lb, and the 7,200 lb top rating covers about 21,600 lb.
  2. Mount: most Albion 6 x 3 in polyurethane casters use a 5-1/4 x 7-1/4 in top plate; 6 x 7-1/2 in plates are listed too; measure bolt hole centers on the old plate and compare.
  3. Floor: on Albion 6 x 3 in polyurethane casters, polyurethane is kinder to tile and finished floors; nylon and cast iron roll easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid Albion 6 x 3 in polyurethane casters are listed.

Albion 6 x 3 in polyurethane casters questions

How much weight can Albion 6 x 3 in polyurethane casters carry?

Single Albion 6 x 3 in polyurethane casters are rated 2,000 to 7,200 lb.

What top plate do Albion 6 x 3 in polyurethane casters use?

Most Albion 6 x 3 in polyurethane casters use 5-1/4 x 7-1/4 in. Other plates on Albion 6 x 3 in polyurethane casters: 6 x 7-1/2 in.

What wheel material is most common on Albion 6 x 3 in polyurethane casters?

Polyurethane leads on Albion 6 x 3 in polyurethane casters, rated 2,000 lb per caster. Among Albion 6 x 3 in polyurethane casters, nylon is next at 2,000 to 7,200 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search