50mm (2") Dinette Chair Casters

These 50mm (2 in) dinette chair casters fit kitchen and dining chairs that use a 7/16 x 7/8 in grip-ring stem. Casters in this collection range from about 75 to 90 lb per caster. Set packs are labeled about 360 to 376 lb per set. Soft rubber or polyurethane (poly or urethane) protects hardwood and tile under a dining set in homes, schools, restaurants, and food service. Hard nylon rolls easier when the chairs also sit on carpet. Measure the socket before you buy. Many cheap online packs use a 5/16 stem that will not seat in a 7/16 grip-ring socket. Soft polyurethane or TPR is the better pick when crumbs and grit stay on the floor. Choose a soft tread when the chairs stay on hard floors most of the day. Capacities below are per caster unless a listing says set. Carpet grip-ring aisle: 7/16 grip ring stem casters for carpet. Broader seating: chair casters.

Floor pick

Tread	Per caster	Floor
Nylon twin wheel (Shepherd PPA / CasterHQ)	75 to 90 lb	Carpet and rugs
Polyurethane / TPR / soft rubber	About 75 lb where listed	Hardwood, tile, vinyl
Shepherd PBH ball (polyolefin)	80 lb	Multi-direction under tables

Admin ACTIVE titles for 50mm-2-dinette-chair-casters, pulled October 26, 2026 [S1]. Titles that show 375 lb without set wording are treated as set totals (75 x 5).

Fit checklist

Stem: 7/16 x 7/8 in grip ring
Wheel: about 50 mm / 2 in
Replace all four or five casters together for even height
Side-lock brake versions available on several Shepherd PPA SKUs

Dining chair caster questions

What casters for kitchen chairs on hardwood?

Use soft rubber, TPR, or polyurethane 2 in casters on 7/16 grip ring stems. Nylon twin wheels are better when the chairs mostly stay on carpet.

How much weight can a set hold?

About 75 to 90 lb per caster. A set of 4 at 90 lb each is 360 lb total if the load is even. Keep spare capacity for people shifting in the chair.

Jordan Wilson, CasterHQ · reviewed October 26, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ Admin products for 50mm-2-dinette-chair-casters, pulled October 26, 2026 (24 ACTIVE).
[S2] Shepherd PPA50223 / PBH20223 series capacity notes.
[S3] GSC 28d audit 2026-10-19: wheels for kitchen chairs / dining chair casters cluster.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

50mm (2") Dinette Chair Casters

Floor pick

Fit checklist

Dining chair caster questions

Sources