7,501 to 10,000 lb Per Caster · Super-Heavy Industrial Casters · 4" to 21"

This collection holds 7,501 to 10,000 lb Per Caster with metal, forged steel and polyurethane wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection range from 2,200 to 34,000 lb per caster. Wheels in this category range from 4 up to 40 inches in diameter with 2 to 7 in tread widths. The collection includes swivel and rigid models. Kingpinless swivels hold up better under shock and repeat loads. Dual wheel casters split the load over two wheels and swivel with less effort under heavy loads. Flanged and V groove track wheels ride on rail or angle iron track for straight line travel. Metal wheels roll with low effort and handle debris and heat. They are loud and can mark finished floors. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Forged steel aisle: forged steel casters. Wheel hub: replacement wheels.

Shop by wheel material

9 types

Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →

Caster Finder Find your caster in 3 steps Mount, size, capacity, narrowed to your exact spec in this collection.

7,501 to 10,000 lb Per Caster: buying guide

Casters rated 7,501 to 10,000 lb in polyurethane, steel and forged steel, 4 to 21 in wheels, rated 7,700 to 10,000 lb per caster.

Diameter 4 to 21 inTread 3, 4 and 5 inPlate 8-1/2 x 8-1/2 in (most)7,700 to 10,000 lb per caster

Casters rated 7,501 to 10,000 lb by tread

Tread	Core	Wheel sizes	Rated per caster	Listed temperature	Where it fits
Polyurethane	Cast iron and Forged steel	6 to 18 in	7,700 to 10,000 lb	-5°F to 160°F	quiet, floor-friendly and long wearing
Steel		4, 6, 8 and 10 in	8,000 to 10,000 lb	-30°F to 320°F	heavy loads and track
Forged steel	Steel	6, 8, 10 and 14-7/8 in	10,000 lb	Up to 800°F	very high loads and impact
Cast iron	Steel	12, 15 and 16 in	8,000 lb	-5°F to 160°F	heat, chips and heavy loads on rough floors
Nylon		12 in	10,000 lb	-30°F to 220°F	low rolling effort on smooth floors, handles wet areas
Rubber	Steel	21 in	7,700 lb	-30°F to 120°F	cushioned and quiet on finished floors
Phenolic		12 in	8,000 to 10,000 lb	Up to 250°F	hard and easy rolling on smooth, dry floors

Ratings are for single casters of casters rated 7,501 to 10,000 lb, from product fields [S1].

Wheel sizes

Wheel	Treads	Rated
6 x 3 in	steel and forged steel	8,000 to 10,000 lb
8 x 2-1/4 in	steel	8,000 lb
8 x 2-1/2 in	steel	8,000 lb
8 x 4 in	steel, forged steel and polyurethane	8,000 to 10,000 lb
10 x 3 in	forged steel, polyurethane and steel	8,000 to 10,000 lb
10 x 4 in	polyurethane, steel and forged steel	8,000 to 10,000 lb
12 x 4 in	nylon, polyurethane and phenolic	8,000 to 10,000 lb
16 x 5 in	polyurethane and cast iron	7,700 to 10,000 lb

Choosing casters rated 7,501 to 10,000 lb

Load: plan on three casters carrying a four-caster cart [S2]; casters rated 7,501 to 10,000 lb rated 10,000 lb each then carry about 30,000 lb.
Mount: most casters rated 7,501 to 10,000 lb use a 8-1/2 x 8-1/2 in top plate; 6-1/2 x 7-1/2 in and 6-1/4 x 7-1/2 in plates are listed too; measure bolt hole centers on the old plate and compare.
Floor: on casters rated 7,501 to 10,000 lb, polyurethane and rubber are kinder to tile and finished floors; steel, forged steel, cast iron, nylon and phenolic roll easier under heavy loads on smooth concrete.
Rig: swivel and rigid casters rated 7,501 to 10,000 lb are listed.
Heat: among casters rated 7,501 to 10,000 lb, the highest listed range is up to 800°F on forged steel; check the temperature field on each listing before oven or hot-room use.

Related to casters rated 7,501 to 10,000 lb: industrial casters.

Casters rated 7,501 to 10,000 lb questions

How much weight can casters rated 7,501 to 10,000 lb carry?

Single casters rated 7,501 to 10,000 lb are rated 7,700 to 10,000 lb; most fall between 8,000 and 10,000 lb.

What top plate do casters rated 7,501 to 10,000 lb use?

Most casters rated 7,501 to 10,000 lb use 8-1/2 x 8-1/2 in. Other plates on casters rated 7,501 to 10,000 lb: 6-1/2 x 7-1/2 in and 6-1/4 x 7-1/2 in.

What wheel material is most common on casters rated 7,501 to 10,000 lb?

Polyurethane leads on casters rated 7,501 to 10,000 lb, rated 7,700 to 10,000 lb per caster. Among casters rated 7,501 to 10,000 lb, steel is next at 8,000 to 10,000 lb.

Are replacement wheels sold for casters rated 7,501 to 10,000 lb?

Yes. Wheel-only listings for casters rated 7,501 to 10,000 lb are here, sized 6 to 18 in; measure bore and hub length before you order.

How long do 7,501 to 10,000 lb casters take to ship?

Lead time on 7,501 to 10,000 lb casters depends on brand and model: Hamilton builds many of its models here to order, typically 4 to 6 weeks, and Hamilton models stocked for Pronto Ship go out faster.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.
[S3] Hamilton Caster catalog, PRONTO star marks for stocked models (hamiltoncaster.com/catalog.pdf), checked October 20, 2026.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters