8" x 2" Nylon Wheels · 600-3,300 lb

This collection holds 8 Wheels Wheels with nylon, polyurethane and semi steel treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection range from 600 to 3,300 lb per wheel. Wheels in this category are 8 inches in diameter with a 2 in tread width. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Semi steel (gray iron) rolls with low effort and shrugs off debris. It is loud and can mark finished floors. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Nylon aisle: nylon casters. Caster hub: heavy duty casters.

Blickle 8 x 2 in nylon wheels by tread

Tread	Core	Wheel sizes	Rated per wheel	Listed temperature	Where it fits
Nylon		8 in	1,320 to 3,300 lb	-40°F to 250°F	low rolling effort on smooth floors, handles wet areas
Polyurethane	Cast iron	8 in	1,500 to 1,550 lb	-13°F to 158°F	quiet, floor-friendly and long wearing
Rubber	Cast iron	8 in	600 lb		cushioned and quiet on finished floors
Cast iron		8 in	1,400 lb		heat, chips and heavy loads on rough floors
Phenolic		8 in	1,400 lb	Up to 250°F	hard and easy rolling on smooth, dry floors

Ratings are for single wheels of Blickle 8 x 2 in nylon wheels, from product fields [S1].

Choosing Blickle 8 x 2 in nylon wheels

Load: divide the loaded weight by three for a four-wheel cart [S2]. Among Blickle 8 x 2 in nylon wheels, a 1,550 lb wheel then suits about 4,650 lb, and the strongest at 3,300 lb about 9,900 lb.
Floor: on Blickle 8 x 2 in nylon wheels, polyurethane and rubber are kinder to tile and finished floors; nylon, cast iron and phenolic roll easier under heavy loads on smooth concrete.

Related to Blickle 8 x 2 in nylon wheels: caster wheels.

Blickle 8 x 2 in nylon wheels questions

How much weight can Blickle 8 x 2 in nylon wheels carry?

Single Blickle 8 x 2 in nylon wheels are rated 600 to 3,300 lb; most fall between 1,320 and 1,550 lb.

What wheel material is most common on Blickle 8 x 2 in nylon wheels?

Nylon leads on Blickle 8 x 2 in nylon wheels, rated 1,320 to 3,300 lb per wheel. Among Blickle 8 x 2 in nylon wheels, polyurethane is next at 1,500 to 1,550 lb.

Are complete casters listed with Blickle 8 x 2 in nylon wheels?

Yes. Complete casters are on this page too, rated 1,760 lb each; compare the wheel size and bore with your Blickle 8 x 2 in nylon wheels before ordering.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

8" x 2" Nylon Wheels · 600-3,300 lb

Blickle 8 x 2 in nylon wheels by tread

Choosing Blickle 8 x 2 in nylon wheels

Blickle 8 x 2 in nylon wheels questions

Sources