Blickle Replacement Wheels

This collection holds Blickle Replacement Wheels with nylon, polyurethane and phenolic treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection range from 220 to 3,300 lb per wheel. Wheels in this category range from 3-1/8 up to 16 inches in diameter with 1-1/4 to 10 in tread widths. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Phenolic rolls easily on smooth floors and handles dry heat, oil, and grease, but it is not made for water or washdown. It suits warehouse carts, toolboxes, and tool carts, and it is loud on rough floors. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Nylon aisle: nylon casters. Caster hub: heavy duty casters.

Shop by wheel material

3 types

Rubber and polyurethane favor floor protection; phenolic and steel favor heavy capacity. Compare materials →

Blickle replacement wheels by tread

Tread	Core	Wheel sizes	Rated per wheel	Listed temperature	Where it fits
Nylon		3-1/8 to 10 in	220 to 3,300 lb	-40°F to 250°F	low rolling effort on smooth floors, handles wet areas
Polyurethane	Cast iron	5, 6, 6-5/16 and 8 in	240 to 1,550 lb	-13°F to 158°F	quiet, floor-friendly and long wearing
Phenolic		4, 5, 6 and 8 in	800 to 1,400 lb	Up to 250°F	hard and easy rolling on smooth, dry floors
Rubber	Cast iron	8 in	600 lb		cushioned and quiet on finished floors
Cast iron		8 in	1,400 lb		heat, chips and heavy loads on rough floors

Ratings are for single wheels of Blickle replacement wheels, from product fields [S1].

Wheel sizes

Wheel	Treads	Rated
3-1/8 x 1-7/16 in	nylon	350 to 770 lb
3-1/2 x 1-1/4 in	nylon	300 to 330 lb
4 x 1-7/16 in	nylon	615 to 1,100 lb
5 x 2 in	nylon and phenolic	1,000 to 1,650 lb
6 x 2 in	nylon, phenolic and polyurethane	880 to 1,760 lb
6 x 2-1/8 in	polyurethane	240 to 1,100 lb
6-5/16 x 2 in	nylon and polyurethane	990 to 1,870 lb
8 x 2 in	nylon, polyurethane and rubber	600 to 3,300 lb

Choosing Blickle replacement wheels

Load: divide the loaded weight by three for a four-wheel cart [S2]. Among Blickle replacement wheels, a 1,400 lb wheel then suits about 4,200 lb, and the strongest at 3,300 lb about 9,900 lb.
Floor: on Blickle replacement wheels, polyurethane and rubber are kinder to tile and finished floors; nylon, phenolic and cast iron roll easier under heavy loads on smooth concrete.

Related to Blickle replacement wheels: caster wheels.

Blickle replacement wheels questions

How much weight can Blickle replacement wheels carry?

Single Blickle replacement wheels are rated 220 to 3,300 lb; most fall between 615 and 1,400 lb.

What wheel material is most common on Blickle replacement wheels?

Nylon leads on Blickle replacement wheels, rated 220 to 3,300 lb per wheel. Among Blickle replacement wheels, polyurethane is next at 240 to 1,550 lb.

Are complete casters listed with Blickle replacement wheels?

Yes. Complete casters are on this page too, rated 1,760 lb each; compare the wheel size and bore with your Blickle replacement wheels before ordering.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters