Back to Casters

Albion Ergonomic Casters · Up to 7,200 lb · 4"–10" · Polyurethane

This collection holds Ergonomic Wheel casters with ergonomic polyurethane, nylon and semi steel wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection range from 1,200 to 7,100 lb per caster. Wheels in this category range from 5 up to 10 inches in diameter with 2 to 3 in tread widths. The collection includes swivel, rigid, and brake models. Kingpinless swivels hold up better under shock and repeat loads. Ergonomic polyurethane wheels are made to lower push effort, which helps workers move heavy carts by hand. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. Semi steel (gray iron) rolls with low effort and shrugs off debris. It is loud and can mark finished floors. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Polyurethane aisle: polyurethane casters. Wheel hub: replacement wheels.

Shop by type

3 types

Wheel = wheel diameter · capacity is per caster.

Albion ergonomic casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Polyurethane Aluminum and Cast iron 4, 5, 6, 8 and 10 in 800 to 2,500 lb -40°F to 180°F quiet, floor-friendly and long wearing
Nylon 6, 8 and 10 in 1,200 to 5,400 lb -30°F to 220°F low rolling effort on smooth floors, handles wet areas
Rubber 4, 5, 6 and 8 in 375 to 675 lb -45°F to 180°F cushioned and quiet on finished floors
Cast iron 10 in 3,000 to 4,200 lb -40°F to 180°F heat, chips and heavy loads on rough floors

Ratings are for single casters of Albion ergonomic casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
4 x 2 in polyurethane and rubber 350 to 800 lb
5 x 2 in rubber and polyurethane 375 to 1,000 lb
6 x 2 in polyurethane, rubber and nylon 450 to 2,160 lb
8 x 2 in polyurethane, nylon and rubber 600 to 2,200 lb
10 x 2 in polyurethane 2,500 lb
10 x 3 in nylon, cast iron and polyurethane 3,000 to 7,200 lb

Choosing Albion ergonomic casters

  1. Load: divide the loaded weight by three for a four-caster cart [S2]. Among Albion ergonomic casters, a 2,160 lb caster then suits about 6,480 lb, and the strongest at 5,400 lb about 16,200 lb.
  2. Mount: most Albion ergonomic casters use a 4 x 4-1/2 in top plate; 4-1/2 x 6-1/4 in and 5-1/4 x 7-1/4 in plates are listed too; check the bolt spacing on your frame against the plate size.
  3. Floor: on Albion ergonomic casters, polyurethane and rubber are kinder to tile and finished floors; nylon and cast iron roll easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid Albion ergonomic casters are listed, with face contact brake and side lock brake options.

Albion ergonomic casters questions

How much weight can Albion ergonomic casters carry?

Single Albion ergonomic casters are rated 375 to 5,400 lb; most fall between 1,250 and 2,160 lb.

What top plate do Albion ergonomic casters use?

Most Albion ergonomic casters use 4 x 4-1/2 in. Other plates on Albion ergonomic casters: 4-1/2 x 6-1/4 in and 5-1/4 x 7-1/4 in.

What wheel material is most common on Albion ergonomic casters?

Polyurethane leads on Albion ergonomic casters, rated 800 to 2,500 lb per caster. Among Albion ergonomic casters, nylon is next at 1,200 to 5,400 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search