Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery Oven Rack Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
Wheel = wheel diameter · capacity is per wheel.
| Wheel | Rated load | Notes |
|---|---|---|
| 2-1/2 x 1-1/4 in | 150 lb | |
| 3 x 1-1/4 in | 210 lb | |
| 4 x 1-1/4 in | 250 lb | |
| 5 x 1-1/4 in | 300 lb | |
| 4 x 2 in | 350 lb | Two listings, one crowned |
| 5 x 2 in | 400 lb | Two listings, one crowned |
| 6 x 2 in | 500 lb | TP and TPC models, TPC crowned |
| 8 x 2 in | 600 lb | Two listings, one crowned |
Product fields and descriptions [S1].
If the axle or hub does not match, it is often simpler to replace the whole caster. See TPR casters.
A crowned tread is rounded across its width, so less of it touches the floor. It turns more easily under load. A flat tread spreads the load wider and wears more evenly on long straight runs.
The product descriptions list food service, hospitals and laboratories [S1]. The gray tread is listed as non-marking, so it suits carts on finished floors. For heavier wheels see rubber wheels or polyolefin wheels.
No. They are wheels only. Casters with the same tread are on the TPR casters page.
A polyolefin plastic core with the gray thermoplastic rubber tread bonded to it.
From 150 lb for the 2-1/2 in wheel to 600 lb for the 8 x 2 in wheel.
Diameter, tread width, axle size and hub length.
