High-Temp Phenolic Wheels

This collection holds High-Temp Phenolic Wheels with phenolic treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection range from 200 to 2,600 lb per wheel. Wheels in this category range from 3 up to 12 inches in diameter with 1-1/4 to 3 in tread widths. Phenolic rolls easily on smooth floors and handles dry heat, oil, and grease, but it is not made for water or washdown. It suits warehouse carts, toolboxes, and tool carts, and it is loud on rough floors. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Phenolic aisle: phenolic casters. Caster hub: heavy duty casters.

High-temp phenolic wheels by tread

Tread	Core	Wheel sizes	Rated per wheel	Listed temperature	Where it fits
High-temp phenolic	Phenolic	3 to 12 in	200 to 2,600 lb	Up to 250°F	oven and hot-room carts

Ratings are for single wheels of high-temp phenolic wheels, from product fields [S1].

Wheel sizes

Wheel	Treads	Rated
3 x 1-1/4 in	high-temp phenolic	200 lb
4 x 1-1/4 in	high-temp phenolic	250 lb
4 x 2 in	high-temp phenolic	600 to 800 lb
5 x 1-1/4 in	high-temp phenolic	300 lb
5 x 2 in	high-temp phenolic	750 to 1,000 lb
6 x 2 in	high-temp phenolic	900 to 1,200 lb
6 x 3 in	high-temp phenolic	1,700 lb
8 x 2 in	high-temp phenolic	1,100 to 1,400 lb

Choosing high-temp phenolic wheels

Load: divide the loaded weight by three for a four-wheel cart [S2]. Among high-temp phenolic wheels, a 1,700 lb wheel then suits about 5,100 lb, and the strongest at 2,600 lb about 7,800 lb.
Floor: on high-temp phenolic wheels, high-temp phenolic suits smooth concrete and heavy loads, but is loud and hard on tile and wood.

High-temp phenolic wheels questions

How much weight can high-temp phenolic wheels carry?

Single high-temp phenolic wheels are rated 200 to 2,600 lb; most fall between 600 and 1,700 lb.

What wheel material is most common on high-temp phenolic wheels?

High-temp phenolic leads on high-temp phenolic wheels, rated 200 to 2,600 lb per wheel.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters