The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Kitchen Prep Table Casters

These kitchen prep table casters fit light carts, racks, and stands. Casters in this collection are rated 500 lb per caster. Wheels are 4 x 1-1/4 polyurethane in swivel and brake models. Sets of 4 show the combined set rating on the title, so divide by 4 for the per caster load. Six packs divide the set rating by 6. Solid polyurethane (poly or urethane) is quiet, floor safe, and resists water and many chemicals. Softer polyurethane or soft rubber or TPR tread is the better pick when the floor has chips or grit. Threaded stem, grip-ring, and expanding rubber stems for round and square tubing all appear on light-duty builds. Match the stem size and thread before you order. Brakes help on ramps. Check the floor first. Read the listing for the exact wheel size, overall height, and mount shown. Polyurethane wheel aisle: polyurethane wheels. Light duty hub: light duty casters.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Kitchen Prep Table Casters