Back to Casters

Non-Metallic

Custom made to order. All sales final.

Each Hamilton product is custom manufactured for your order (lead time is shown on each product page). Please confirm all specs before checkout, since made-to-order items aren't eligible for returns, exchanges or refunds. Need help? Call 844-439-4335 or email info@casterhq.com and we'll verify fit for you.

This collection holds Non-Metallic with mixed tread treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection range from 260 to 1,400 lb per wheel. Wheels in this category range from 3 up to 8 inches in diameter with 1 to 2 in tread widths. Wheel options vary, so match the tread to the floor and the load. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Call or email CasterHQ with the part number from the old unit if you need help matching it. Polyurethane aisle: polyurethane casters. Caster hub: heavy duty casters.

Shop by wheel type

3 types

Wheel = wheel diameter · capacity is per wheel.

Hamilton non-metallic wheels by tread

Tread Core Wheel sizes Rated per wheel Listed temperature Where it fits
Nylon 3, 4, 5, 6 and 8 in 560 to 1,400 lb Up to 550°F low rolling effort on smooth floors, handles wet areas
Rubber Nylon 4 in 260 lb Up to 572°F cushioned and quiet on finished floors

Ratings are for single wheels of Hamilton non-metallic wheels, from product fields [S1].

Wheel sizes

Wheel Treads Rated
3 x 1-1/2 in nylon 560 lb
4 x 1-3/8 in rubber and nylon 260 to 700 lb
4 x 1-1/2 in nylon 670 lb
4 x 2 in nylon 800 lb
5 x 1-3/8 in nylon 800 lb
5 x 2 in nylon 1,000 lb
6 x 2 in nylon 1,200 lb
8 x 2 in nylon 1,400 lb

Choosing Hamilton non-metallic wheels

  1. Load: plan on three wheels carrying a four-wheel cart [S2]; at 1,200 lb each, a common rating here, that is about 3,600 lb, and the 1,400 lb top rating covers about 4,200 lb.
  2. Floor: on Hamilton non-metallic wheels, rubber is kinder to tile and finished floors; nylon rolls easier under heavy loads on smooth concrete.
  3. Heat: among Hamilton non-metallic wheels, the highest listed range is up to 572°F on rubber; check the temperature field on each listing before oven or hot-room use.

Hamilton non-metallic wheels questions

How much weight can Hamilton non-metallic wheels carry?

Single Hamilton non-metallic wheels are rated 260 to 1,400 lb; most fall between 700 and 1,200 lb.

What wheel material is most common on Hamilton non-metallic wheels?

Nylon leads on Hamilton non-metallic wheels, rated 560 to 1,400 lb per wheel. Among Hamilton non-metallic wheels, rubber is next at 260 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search