Specialty Casters
Gate Casters
BBQ Pit & Smoker Casters
Keyed Drive Wheels
Drywall Cart Casters
Skid Wheels & Casters for RVs
Leveling Casters
Shopping Cart Wheels & Casters
Band Equipment Casters & Wheels
Low Profile Casters
Cart Wheels & Casters
Toolbox Caster Sets
Bakery Oven Rack Casters
Kitchen Prep Table Caster Sets
Wire Shelving Casters
Silent Glide Casters
6 x 7-1/2 in plate casters from Albion, for equipment built with a 6 x 7-1/2 in top plate. Wheels 6 in to 10 in, rated 5,500 to 10,000 lb per caster, in forged steel and nylon. Measure the plate and the bolt-hole spacing on your old caster before ordering.
| Wheel | Wheel material | Type | Rated per caster |
|---|---|---|---|
| 6 in | Forged steel | Rigid | 10,000 lb |
| 10 in | Forged steel | Rigid | 10,000 lb |
| 6 in | Nylon | Rigid | 7,200 lb |
| 8 in | Forged steel | Rigid | 5,500 lb |
Product titles and spec fields [S1].
Other plate sizes: all plate casters. Questions on a fit: call 844-439-4335 or email info@casterhq.com with a photo of the old caster.
Ratings on this page run 5,500 to 10,000 lb per caster. The highest is 10,000 lb, a 6 in forged steel caster. For a cart on four casters, divide the loaded weight by three to get the rating each caster needs, so the load is still covered when one caster lifts on an uneven floor.
Measure the overall plate on your old caster with calipers, then the center-to-center spacing of the bolt holes. Both must match for a bolt-on swap. Hole spacing is listed on each product page.
Same-Day Ship applies to in-stock items ordered by noon CST. Larger casters can ship by freight.
