Up to 350 lbs
Up to 7,000 lbs
Up to 16,000 lbs
Up to 40,000 lbs
Shock absorbing
Outdoor / rough terrain
View All Specialty Casters
Browse all specialty caster types
All measurements indicate the wheel diameter by the tread width.
The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.
W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.
Plate dimensions shown are overall mounting plate size.
When replacing existing casters, select the closest plate size and verify bolt-hole compatibility.
BHP = Bolt Hole Pattern, shown under each plate.
























| Tread | Core | Wheel sizes | Rated per wheel | Listed temperature | Where it fits |
|---|---|---|---|---|---|
| Rubber | Cast iron and Polyolefin | 3 to 20 in | 100 to 6,200 lb | -30°F to 160°F | cushioned and quiet on finished floors |
| Cast iron | Steel | 15, 16, 18 and 20 in | 3,400 to 8,600 lb | 0°F to 175°F | heat, chips and heavy loads on rough floors |
| Polyolefin | 3-1/2 to 10 in | 240 to 550 lb | -40°F to 180°F | wet and chemical areas, light to medium loads | |
| Nylon | 4 to 12 in | 300 to 1,200 lb | Up to 180°F | low rolling effort on smooth floors, handles wet areas | |
| Polyurethane | Aluminum | 6 and 8 in | 300 to 500 lb | -30°F to 250°F | quiet, floor-friendly and long wearing |
Ratings are for single wheels of rubber wheels (all types), from product fields [S1].
| Wheel | Treads | Rated |
|---|---|---|
| 4 x 2 in | rubber, polyolefin and nylon | 200 to 450 lb |
| 5 x 1-1/4 in | rubber and polyolefin | 250 to 325 lb |
| 5 x 2 in | rubber, polyolefin and nylon | 250 to 500 lb |
| 6 x 2 in | rubber, polyolefin and polyurethane | 300 to 700 lb |
| 8 x 2 in | rubber, polyurethane and polyolefin | 400 to 2,400 lb |
| 10 x 2-1/2 in | rubber and nylon | 790 to 1,000 lb |
| 12 x 2-1/2 in | rubber and nylon | 900 to 1,200 lb |
| 16 x 5 in | rubber and cast iron | 2,570 to 4,700 lb |
Related to rubber wheels (all types): caster wheels.
Single rubber wheels (all types) are rated 100 to 8,600 lb; most fall between 410 and 1,600 lb.
Most rubber wheels (all types) use 4 x 4-1/2 in.
Rubber leads on rubber wheels (all types), rated 100 to 6,200 lb per wheel. Among rubber wheels (all types), cast iron is next at 3,400 to 8,600 lb.
Yes. Complete casters are on this page too, rated 300 to 840 lb each; compare the wheel size and bore with your rubber wheels (all types) before ordering.
Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com
Search
