The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Hudson Bearings Stainless Steel Ball Transfer Units · 4 Styles · Up to 200 lb · 1" · Series

Diameter: 1 inCapacity: up to 200 lb

Hudson Bearings Stainless Steel Ball for chemical, food-contact, and washdown carts. Typical builds show wheel diameters 1 in, nylon, steel, and stainless treads, and industrial frames. Replace worn corners in matched sets when possible so the cart tracks straight under load. When floors see chemicals or washdowns, prefer sealed bearings and non-absorbent wheel compounds. These light-duty options cover everyday chemical, food-contact, and washdown carts without jumping to extreme forged series.

Shop by type

2 types

Wheel = wheel diameter · capacity is per caster.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Hudson Bearings Stainless Steel Ball Transfer Units · 4 Styles · Up to 200 lb · 1" · Series

Shop by type