The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Under 350 lbs. each
351–675 lbs. each
676–1,250 lbs. each
1,251–2,000 lbs. each
2,001–4,000 lbs. each
4,001–7,500 lbs. each
7,501–10,000 lbs. each
10,001–15,000 lbs. each
15,001–20,000 lbs. each
20,001–30,000 lbs. each
30,000+ lbs. each

6" x 3" Phenolic Wheels

Diameter: 6 inTread: 2, 3 inCapacity: up to 1,700 lb

This collection gathers industrial casters used on bake carts, metalworking fixtures, and debris-heavy floors. You will see wheel diameters 6 in, phenolic treads, and capacities 900 to 1,700 lb across the SKUs listed below. Phenolic shrugs off heat and oils that soften rubber or poly on bake and shop carts. Replace worn corners in matched sets when possible so the cart tracks straight under load.

Shop by wheel type

2 types

Wheel = wheel diameter · capacity is per wheel.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

6" x 3" Phenolic Wheels

Shop by wheel type