The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Rubber on Steel Wheels

These rubber on iron spring loaded casters fit shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 550 to 600 lb per caster. Wheels are 6 and 8 x 2 in swivel models. Spring loaded casters absorb shock and help gates and carts stay level on uneven floors. Mold on rubber wheels bond rubber to a cast iron core, so they are quiet, cushion the load, and protect floors. Match plate size, bolt pattern, and overall height before you order. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Call or email CasterHQ with the part number from the old unit if you need help matching it. Mold on rubber aisle: mold on rubber casters. Plate aisle: plate casters.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Rubber on Steel Wheels