SHEPHERD

Shepherd 50mm Windsor Antique Locking Caster 5/16" x 1-1/2" Stem – 75 lb | CasterHQ

Wheel

50" x 1-1/2"

Capacity

75 lbs

Overall Height

2-3/8"

Mount

Grip Neck Stem

Full specs Spec sheet (PDF)

$30.00 USD - $31.22 USD

Save 30%+ vs big-box distributors

In Stock · Ships in 1-3 Business Days

✉️ Email a Caster Solutions Expert (Mon–Fri 8–5 CST)

PO Net 30 ACH Tax-Exempt

Business Purchasing

Purchase orders accepted for approved accounts
Net 30 terms for qualified businesses
ACH, credit card, and tax-exempt ordering
Bulk and contract pricing on fleet quantities

Upload a PO / Quote·Request bulk pricing·844-439-4335

Not sure this is the right spec? Jordan (Founder) and Bob (45+ years in casters) review applications before you order.

Call now

Product Overview

At a glance

Load capacity75 lbs

Wheel50" × 1-1/2"

MountGrip Neck Stem — 5/16" x 1-1/2"

Overall height2-3/8"

Pacer Hooded Caster - Locking Windsor Antique Plated 50mm Diameter | 5/16" x 1-1/2" Grip Neck Stem | 75 lbs load Capacity

The Pacer Series is a sleek modern looking caster that comes with a 5/16" x 1-1/2" Grip Neck Stem. Grip Neck Stem Casters are commonly referred to as wood stem casters. These casters are made to mount in wood furniture. Grip neck Stem Casters almost always need to be used with a metal wood socket before installing in wooded furniture. These metal sockets have teeth at the base with a hollow tube that is meant to be inserted inside the wood to allow you to mount the casters. The spikes on the bottom of the socket are meant to be hammered into the furniture after the hole is drilled into the furniture for the socket to be inserted appropriately. After the metal socket is inserted into the furniture, you will use these Grip Neck Stem casters as seen below to insert into the metal socket, these casters will pop into the sockets, and no further adjustments will be needed. Then your furniture will now be safely outfitted with a furniture caster. Long story short, These casters need a socket that would be permanently fixed to the unit you are planning to mount the caster to. This will allow the grip neck stem caster to quickly and safely pop into place.

Technical Specifications:

Wheel Diameter: 50mm
Mounting Height: 2-3/8"
Swivel Radius: 1-3/4"
Finish Type: Windsor Antique
Dynamic Load Capacity: 75 lbs per caster
Mounting Type: Grip Neck Stem
Mounting Stem Dimensions: 5/16" Diameter x 1-1/2" Long

The most commonly used Socket used in conjunction with these casters can be purchased here.

Key Features

Fast Deliveries for any order quantity
Zinc Die-Cast Body and Hood
Concealed Axle
Store Fixtures
Seating
Electronic Equipment
Office Equipment
MADE IN USA

Ordering & Shipping Information

Order processing

In stock. Orders placed before 12pm CT (Mon–Fri) typically ship the same or next business day from our Mansfield, TX warehouse.

Shipping method

Because of its size and weight, this item typically ships LTL freight on a pallet. Smaller add-on items may ship parcel. Freight cost is calculated by destination and shown before payment, or quoted for large orders.

Payment & procurement terms

Purchase orders — accepted from approved accounts

Net 30 terms — available on approved credit

ACH & all major cards — Visa, MC, Amex, Discover

Tax-exempt — submit your resale/exemption certificate

New to CasterHQ? Open an account or request terms and send your resale or tax-exemption certificate before ordering so it is applied at checkout.

Volume pricing & quotes

Quantity discounts apply automatically — no codes needed. For large, recurring, or custom requirements, request a bulk quote and our team will confirm pricing, lead time, and total landed freight upfront.

Returns & warranty

Stock items carry a 30-day return policy in unused, resalable condition. Made-to-order and custom items are non-returnable once production starts. All products carry the manufacturer's warranty against defects.

Typical transit times after shipment

Central & Southern U.S.: typically 1–2 business days
East & West Coasts: typically 2–3 business days
Remote areas and freight deliveries may take longer.

Need an exact freight quote or blanket PO?

For pallet freight, scheduled releases, or blanket purchase orders, contact our team and we'll confirm total landed cost before you commit. Direct line: 844-439-4335.

Frequently Asked Questions

What is the load capacity of this caster?+

This Shepherd 50mm Windsor Antique Locking Caster 5/16" x 1-1/2" Stem – 75 lb is rated to 75 lbs per caster. Size a set by dividing the total load by the number of casters, and for uneven floors assume 3 of 4 casters carry the load. Keep continuous-use loads within about 75-80% of the rating.

How does this caster mount to my equipment?+

This caster uses a Grip Neck Stem mount (5/16" x 1-1/2" stem). Stem casters press or thread into a socket - verify the stem diameter and length match your existing setup before ordering.

What is the overall mounted height?+

The overall height (floor to top of plate or stem) is 2-3/8". Account for it when checking equipment clearance, dock height, and ergonomic working height.

How do I order, and what are the terms?+

We accept purchase orders and offer Net 30 on approved accounts, ACH, and all major cards, plus tax-exempt ordering with a resale or exemption certificate. Volume discounts apply automatically; request a bulk quote for large or recurring orders. Stock items carry a 30-day return policy in unused condition (made-to-order items are non-returnable once production starts).

Shepherd 50mm Windsor Antique Locking Caster 5/16" x 1-1/2" Stem – 75 lb | CasterHQ

$30.00

Technical Specifications

Identification
Brand	shepherd
Dimensions & Mounting
Wheel Diameter	50"
Wheel Tread Width	1-1/2"
Overall Height	2-3/8"
Stem Size	5/16" x 1-1/2"
Mount Style	Grip Neck Stem
Load & Performance
Wheel Capacity	75 lbs
Materials & Finish
Frame Material	Zinc Plated Steel

Reference Dimensions

Overall Height2-3/8"

Wheel50" x 1-1/2"

Stem5/16" x 1-1/2"

Illustrative stem profile drawn to this item's proportions — dimensions are manufacturer specification values. Confirm against the technical table before ordering.

Will This Caster Handle Your Load?

Enter your loaded weight — we derate to 3 effective casters on a 4-caster rig, per industry practice for uneven floors.

Rated capacity: 75 lbs per caster. For dynamic loads, towing, or debris-strewn floors, apply additional safety factor · full engineering tools →

Fitment & Interchange

MountGrip Neck Stem

Stem5/16" x 1-1/2"

Documentation

Spec sheet (PDF) 30-day pricing honored Request STEP / CAD fileour engineers email it same day Caster selection guide Caster University Fleet & contract pricing Net 30 available

30-day returns · manufacturer warranty · spec support: 844-439-4335 (Mon–Fri 8–5 CST)

Related Products

View all stem casters →

Shop by caster type Plate Stem Stainless Ergonomic Leveling All industrial casters →

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Shepherd 50mm Windsor Antique Locking Caster 5/16" x 1-1/2" Stem – 75 lb | CasterHQ

Product Overview

Pacer Hooded Caster - Locking Windsor Antique Plated 50mm Diameter | 5/16" x 1-1/2" Grip Neck Stem | 75 lbs load Capacity

Key Features

Ordering & Shipping Information

Frequently Asked Questions

Shepherd 50mm Windsor Antique Locking Caster 5/16" x 1-1/2" Stem – 75 lb | CasterHQ

Technical Specifications

Related Products