The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

3-1/4" x 1-1/2" Phenolic Casters

Plate sizes: 4 x 4-1/2Bolt holes: 2-5/8 x 3-3/8 slotted to 3 x 3Diameter: 3-1/4 inTread: 1-1/2 inCapacity: up to 550 lb

Match a 4 x 4-1/2 top plate when bolting casters under bake carts, metalworking fixtures, and debris-heavy floors. You will see wheel diameters 3-1/4 in, phenolic treads, and capacities 550 lb across the SKUs listed below. Size capacity from the heaviest corner load with shock margin, and keep overall height consistent across the set. Bring plate and stem measurements when replacing unmarked casters so the new corners sit level.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

3-1/4" x 1-1/2" Phenolic Casters