Back to Casters

3-1/8 X 4-1/8 inch Top Plate

This collection holds 3-1/8 X 4-1/8 inch Top Plate casters with mixed wheels, built for light carts, racks, and stands. Casters in this collection range from 200 to 300 lb per caster. Wheels in this category range from 4 up to 5 inches in diameter with 1-1/4 to 1-1/2 in tread widths. The collection includes rigid models. Wheel options vary, so match the tread to the floor and the load. Common uses include food service, bakeries, hospitals, schools, laboratories, and material handling carts. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Polyurethane aisle: polyurethane casters. Wheel hub: replacement wheels.

Shop by type

2 types

Wheel = wheel diameter · capacity is per caster.

P&H 3-1/8 X 4-1/8 inch top plate casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Nylon Polyolefin 5 in 250 lb -30°F to 140°F low rolling effort on smooth floors, handles wet areas
Epoxy resin 4 in 200 to 300 lb 475°F continuous; 550°F intermittent (up to 30 min) oven racks
Polyurethane Polyolefin 4 in 200 lb -30°F to 140°F quiet, floor-friendly and long wearing

Ratings are for single casters of P&H 3-1/8 X 4-1/8 inch top plate casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
4 x 1-1/4 in polyurethane 200 lb
4 x 1-1/2 in epoxy resin 200 to 300 lb
5 x 1-1/4 in nylon 250 lb

Choosing P&H 3-1/8 X 4-1/8 inch top plate casters

  1. Load: plan on three casters carrying a four-caster cart [S2]; at 250 lb each, a common rating here, that is about 750 lb, and the 300 lb top rating covers about 900 lb.
  2. Mount: most P&H 3-1/8 X 4-1/8 inch top plate casters use a 3-1/8 x 4-1/8 in top plate; measure bolt hole centers on the old plate and compare.
  3. Floor: on P&H 3-1/8 X 4-1/8 inch top plate casters, polyurethane is kinder to tile and finished floors; nylon rolls easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid P&H 3-1/8 X 4-1/8 inch top plate casters are listed.
  5. Heat: among P&H 3-1/8 X 4-1/8 inch top plate casters, the highest listed range is 475°F continuous; 550°F intermittent (up to 30 min) on epoxy resin; check the temperature field on each listing before oven or hot-room use.

P&H 3-1/8 X 4-1/8 inch top plate casters questions

How much weight can P&H 3-1/8 X 4-1/8 inch top plate casters carry?

Single P&H 3-1/8 X 4-1/8 inch top plate casters are rated 200 to 300 lb.

What top plate do P&H 3-1/8 X 4-1/8 inch top plate casters use?

Most P&H 3-1/8 X 4-1/8 inch top plate casters use 3-1/8 x 4-1/8 in.

What wheel material is most common on P&H 3-1/8 X 4-1/8 inch top plate casters?

Nylon leads on P&H 3-1/8 X 4-1/8 inch top plate casters, rated 250 lb per caster. Among P&H 3-1/8 X 4-1/8 inch top plate casters, epoxy resin is next at 200 to 300 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search