Back to Casters

4 Inch Orange Polyurethane on Aluminum Wheel Casters

These 4 in poly on aluminum wheel casters fit shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 1,000 to 1,250 lb per caster. Wheels are 4 x 2 in swivel, rigid, and brake models. Sets of 4 show the combined set rating on the title, so divide by 4 for the per caster load. Polyurethane (poly or urethane) on an aluminum core is light, quiet, and floor safe. The aluminum hub will not rust. Soft polyurethane on aluminum (~85 Shore A) or TPR is the better pick when the floor has chips or grit. Match the 4 x 4-1/2 in plate, bolt pattern, and overall height before you order. Choose swivel casters when the cart must turn in place, rigid casters for straight travel, and add a brake when the cart needs to stay put. Poly on aluminum aisle: polyurethane on aluminum casters. Plate aisle: plate casters.

4 inch orange polyurethane on aluminum wheel casters by tread

Tread Core Wheel sizes Rated per caster Listed temperature Where it fits
Polyurethane Aluminum 4 in 1,000 to 4,000 lb Up to 180°F quiet, floor-friendly and long wearing
Ductile iron Steel 5 in 1,500 lb -45°F to 800°F heavy loads with better impact strength than cast iron

Ratings are for single casters of 4 inch orange polyurethane on aluminum wheel casters, from product fields [S1].

Wheel sizes

Wheel Treads Rated
4 x 2 in polyurethane 1,000 to 4,000 lb
5 x 2 in ductile iron 1,500 lb

Choosing 4 inch orange polyurethane on aluminum wheel casters

  1. Load: plan on three casters carrying a four-caster cart [S2]; at 1,500 lb each, a common rating here, that is about 4,500 lb, and the 4,000 lb top rating covers about 12,000 lb.
  2. Mount: most 4 inch orange polyurethane on aluminum wheel casters use a 4 x 4-1/2 in top plate; measure bolt hole centers on the old plate and compare.
  3. Floor: on 4 inch orange polyurethane on aluminum wheel casters, polyurethane is kinder to tile and finished floors; ductile iron rolls easier under heavy loads on smooth concrete.
  4. Rig: swivel and rigid 4 inch orange polyurethane on aluminum wheel casters are listed, with total lock brake options.
  5. Heat: among 4 inch orange polyurethane on aluminum wheel casters, the highest listed range is -45°F to 800°F on ductile iron; check the temperature field on each listing before oven or hot-room use.

4 inch orange polyurethane on aluminum wheel casters questions

How much weight can 4 inch orange polyurethane on aluminum wheel casters carry?

Single 4 inch orange polyurethane on aluminum wheel casters are rated 1,000 to 4,000 lb.

What top plate do 4 inch orange polyurethane on aluminum wheel casters use?

Most 4 inch orange polyurethane on aluminum wheel casters use 4 x 4-1/2 in.

What wheel material is most common on 4 inch orange polyurethane on aluminum wheel casters?

Polyurethane leads on 4 inch orange polyurethane on aluminum wheel casters, rated 1,000 to 4,000 lb per caster. Among 4 inch orange polyurethane on aluminum wheel casters, ductile iron is next at 1,500 lb.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search