Back to Casters

5" x 1.25" Phenolic Casters

This collection holds 5 in phenolic Casters with phenolic wheels, built for shop carts, equipment, and material handling. Casters in this collection range from 350 to 1,400 lb per caster. Wheels in this category are 5 inches in diameter with 1-1/4 in tread width. The collection includes swivel, rigid, and brake models. Phenolic wheels are hard, roll with low effort, and handle debris well on unfinished floors. Plate and stem mounts are listed on each product so you can match bolt pattern or stem size before you order. Check load per caster, then pick tread for your floor and mount style for the cart. Browse the sizes on this page and open a product to confirm plate size, stem, and brake options. Use the filters for swivel or rigid, capacity, and wheel type to narrow the list fast. Choose swivel casters when the cart must turn in place and rigid casters for straight travel. Phenolic aisle: phenolic casters. Wheel hub: replacement wheels.

The nine listings

Listing What you get Rated load
Single swivel 1 swivel 350 lb
Single rigid 1 rigid 350 lb
Single swivel with top lock 1 swivel with top lock brake 350 lb
Set: all swivel 4 swivels 1,400 lb
Set: 2 swivel + 2 rigid 2 swivels, 2 rigids 1,400 lb
Set: 2 locking + 2 rigid 2 side lock swivels, 2 rigids 1,400 lb
Set: 2 locking + 2 swivel 2 locking swivels, 2 swivels 1,400 lb
Set: all locking 4 side lock swivels 1,400 lb
Set: front locking 4 front lock swivels 1,400 lb

Product fields and descriptions [S1]. Temperature -50 to 250°F on all nine.

What the LD series is

LD is the light-duty CasterHQ series: a zinc-plated steel rig with a heat treated ball bearing swivel raceway [S1]. The phenolic wheel is a hard molded resin, so it rolls with little effort and is not harmed by oil, grease or mild heat [S2].

Good fits

  • Shop carts, welding carts and parts carts on smooth concrete.
  • Light equipment that has to roll past warm machines, up to 250°F.
  • Carts that see oil or grease on the floor.

Watch for

  • Noise. Phenolic is hard and loud on rough floors.
  • Wet floors and washdown. Colson does not recommend phenolic where moisture is present [S3].
  • Floor debris. A hard wheel does not roll over chips and gravel well.

5 in phenolic caster questions

How much do 5 in phenolic casters hold?

350 lb per caster, 1,400 lb per set of four.

What temperature can they take?

The wheels are rated -50 to 250°F.

What plate do they use?

A 2-3/8 x 3-5/8 in top plate. Overall height is 6-1/4 in.

Are phenolic casters good on wet floors?

No. Phenolic is best on dry floors. For washdown, look at polyurethane or polyolefin wheels.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Hamilton Caster, Industrial Caster Wheels overview and Phenolic & Polyolefin page (hamiltoncaster.com/Wheels): capacity range and use notes for each wheel family; phenolic is resin with macerated canvas, polyolefin is blended polymers such as polyethylene and polypropylene.
  • [S3] Colson D4 Defender stainless datasheet (colsoncaster.com): wheel material summary (rubber, polyurethane, nylon, phenolic, polyolefin).

Search