Blickle Rigid Casters

This collection holds Blickle Rigid Casters with polyurethane and TPR wheels, built for shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 200 to 770 lb per caster. Wheels in this category range from 3 up to 5 inches in diameter with 1-1/4 to 10 in tread widths. The collection includes rigid models. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Thermoplastic rubber (TPR) is quiet, will not mark floors, and rolls over chips and grit. Soft rubber or TPR is the better pick when the floor has chips or grit. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Polyurethane aisle: polyurethane casters. Wheel hub: replacement wheels.

Blickle rigid casters by tread

Tread	Core	Wheel sizes	Rated per caster	Listed temperature	Where it fits
Nylon		4 in	330 to 400 lb	-13°F to 176°F	low rolling effort on smooth floors, handles wet areas
Polyurethane		5 in	400 lb	-13°F to 158°F	quiet, floor-friendly and long wearing
Rubber	Polyolefin	4 in	275 lb		cushioned and quiet on finished floors
Stainless steel		5 in	330 lb		washdown and corrosive areas

Ratings are for single casters of Blickle rigid casters, from product fields [S1].

Wheel sizes

Wheel	Treads	Rated
3 x 1-1/4 in		200 lb
3-1/2 x 1-1/4 in		220 lb
4 x 1-1/4 in	rubber	275 lb
4 x 1-3/8 in		330 lb
4 x 1-1/2 in	nylon	330 to 660 lb
5 x 1 in	polyurethane	400 lb
5 x 1-1/4 in		300 to 400 lb
5 x 1-9/16 in	stainless steel and polyurethane	330 to 770 lb

Choosing Blickle rigid casters

Load: plan on three casters carrying a four-caster cart [S2]; at 400 lb each, a common rating here, that is about 1,200 lb, and the 770 lb top rating covers about 2,310 lb.
Mount: most Blickle rigid casters use a 2 x 3 in top plate; 2-1/2 x 3-5/8 in plates are listed too; measure bolt hole centers on the old plate and compare.
Floor: on Blickle rigid casters, polyurethane and rubber are kinder to tile and finished floors; nylon and stainless steel roll easier under heavy loads on smooth concrete.
Rig: rigid Blickle rigid casters are listed.

Related to Blickle rigid casters: Blickle casters.

Blickle rigid casters questions

How much weight can Blickle rigid casters carry?

Single Blickle rigid casters are rated 200 to 770 lb; most fall between 330 and 400 lb.

What top plate do Blickle rigid casters use?

Most Blickle rigid casters use 2 x 3 in. Other plates on Blickle rigid casters: 2-1/2 x 3-5/8 in.

What wheel material is most common on Blickle rigid casters?

Nylon leads on Blickle rigid casters, rated 330 to 400 lb per caster. Among Blickle rigid casters, polyurethane is next at 400 lb.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters