Cambro Casters · 3"–8" · 210–600 lb · Rubber & Polyurethane

These Cambro casters replace worn wheels on Cambro food carts, insulated transport carts, dish dollies, and storage racks. Casters in this collection range from 210 to 600 lb per caster. Sizes run from 3 in thermoplastic rubber up to 6 and 8 in stainless and zinc units with brakes. Polyurethane (poly or urethane) and thermoplastic rubber treads keep kitchen floors quiet and clean. Soft TPR or rubber tread is the better pick when the floor has chips or grit. Common uses include food service, bakeries, hospitals, schools, laboratories, and material handling carts. Match the stem or plate, wheel size, and overall height to the old caster before you order. Choose swivel casters when the cart must turn in place, rigid casters for straight travel, and add a brake when the cart needs to stay put. Capacities below are per caster unless a listing says set. Food service aisle: food service casters. Stainless aisle: stainless steel casters.

Casters listed

Caster	Plate	Height	Rating
3 x 1-1/4 in TPR, swivel, rigid, brake	2-1/2 x 3-5/8, 2-3/8 x 3-5/8 or 1-1/4 x 3 in	4-1/8 in	210 lb
5 x 1-1/4 in polyurethane, swivel, rigid, top lock brake	1-1/4 x 5 in	6-1/8 in	350 lb
6 x 2 in TPR stainless, swivel, rigid, top lock brake	4 x 4-1/2 in	7-1/2 in	600 lb
8 x 2 in TPR, swivel, rigid, side lock brake	4 x 4-1/2 in	9-1/2 in	600 lb

From product titles and fields [S1].

Matching the original

Foodservice carts use several plate sizes, including narrow strip plates. Measure the plate and bolt holes and the overall height of the old caster, and match both, or the cart will sit unlevel.

Why gray thermoplastic rubber

It is quiet, does not mark kitchen floors and shrugs off water and cleaners. Stainless rigs add corrosion resistance where carts are hosed down daily.

Cambro replacement caster questions

How do I pick a replacement caster for a Cambro cart?

Measure the plate, bolt holes and overall height of the old caster and match them.

Which casters have stainless rigs?

The 6 x 2 in thermoplastic rubber casters.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters