The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Combi & Steam Oven Casters

This collection holds Combi & Steam Oven Casters with phenolic and nylon wheels, built for shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 600 to 1,000 lb per caster. Wheels in this category range from 4 up to 5 inches in diameter with a 2 in tread width. The collection includes swivel models. Phenolic rolls easily on smooth floors and handles dry heat, oil, and grease, but it is not made for water or washdown. It suits warehouse carts, toolboxes, and tool carts, and it is loud on rough floors. Nylon rolls easily, resists water and many chemicals, and is hard, so it is loud on rough floors. For bakery ovens, use high temperature phenolic or green epoxy oven rack wheels, and use glass filled nylon where it is moist or washed down. Match plate size, bolt pattern, and overall height before you order. Phenolic aisle: phenolic casters. Wheel hub: replacement wheels.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Combi & Steam Oven Casters