The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Ratchet straps with D-ring ends

This collection holds D Ring End casters with mixed tread wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection are rated 5,400 lb per caster. Wheels in this category range from 3 up to 4 inches in diameter with a 1 in tread width. Wheel options vary, so match the tread to the floor and the load. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Call or email CasterHQ with the part number from the old unit if you need help matching it. Polyurethane aisle: polyurethane casters. Wheel hub: replacement wheels.

Shop by type

1 type

Wheel = wheel diameter · capacity is per caster.

Type

Widths or sizes

Listed rating

Ratchet strap

3 in and 4 in

5,400 lb

Before you order

The rating on each of these ratchet straps with D-ring ends is the working load limit for the assembly; add up the limits of every strap on the load and check the total against the securement rules for your trailer.

For ratchet straps with D-ring ends, pick the end fitting for the anchor point: flat hooks for flatbed rails, wire or J hooks for stake pockets and frames, D-rings and E-track fittings for van walls.

Related to ratchet straps with D-ring ends: 4 in ratchet straps.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Ratchet straps with D-ring ends

Shop by type

Ratchet straps with D-ring ends on this page

Before you order

Sources