Clearance casters & limited stock deals

Diameter: 2 to 10 inTread: 7/8, 1-1/4 and 2 inPlate: 4 x 4-1/2 inCapacity: 50 to 2,400 lb per caster

Clearance casters & limited stock deals with polyurethane, rubber, nylon and ductile iron wheels. Polyurethane on polyolefin and cast iron cores is the most common tread on these clearance casters & limited stock deals, rated 100 to 1,100 lb per caster in 2-1/2, 3, 3-1/2, 4, 5 and 8 in. Also listed: rubber 50 to 350 lb and nylon 90 to 2,400 lb. Replacement wheels are listed too, rated 350 to 7,000 lb each. Sets of 4 clearance casters & limited stock deals list 1,000 to 4,400 lb combined. Brands: Shepherd and P&H.

Clearance casters & limited stock deals by tread

Tread	Core	Wheel sizes	Rated per caster	Listed temperature	Where it fits
Polyurethane	Polyolefin and Cast iron	2-1/2 to 8 in	100 to 1,100 lb	-40°F to 180°F	quiet, floor-friendly and long wearing
Rubber	Polyolefin and Cast iron	2 to 10 in	50 to 350 lb	-40°F to 180°F	cushioned and quiet on finished floors
Nylon		2 in	90 to 2,400 lb	-40°F to 250°F	low rolling effort on smooth floors, handles wet areas
Ductile iron	Steel	4 and 10 in	Not listed	Up to 800°F	heavy loads with better impact strength than cast iron
Cast iron		3, 4, 6 and 8 in	Not listed	-45°F to 600°F	heat, chips and heavy loads on rough floors
Steel		4 in	450 lb	-40°F to 600°F	heavy loads and track
Pneumatic		8 and 10 in	250 to 350 lb		rough ground, outdoors, fragile loads

Ratings are for single casters of clearance casters & limited stock deals, from product fields [S1].

Wheel sizes

Wheel	Treads	Rated
2 x 7/8 in	nylon and rubber	90 to 2,400 lb
3 x 1-1/4 in	polyurethane and cast iron	300 to 350 lb
3-1/2 x 1-1/4 in	polyurethane	300 lb
4 x 1-1/4 in	polyurethane	250 to 300 lb
4 x 1-1/2 in	steel and ductile iron	450 to 600 lb
4 x 2 in	semi-steel, cast iron and ductile iron	600 to 1,500 lb
5 x 1-1/4 in	polyurethane	350 lb
5 x 2 in	polyurethane	1,100 lb

Choosing clearance casters & limited stock deals

Load: divide the loaded weight by three for a four-caster cart [S2]. Among clearance casters & limited stock deals, a 600 lb caster then suits about 1,800 lb, and the strongest at 2,400 lb about 7,200 lb.
Mount: most clearance casters & limited stock deals use a 4 x 4-1/2 in top plate; 73 x 73 mm (2-7/8 x 2-7/8) in plates are listed too; check the bolt spacing on your frame against the plate size.
Floor: on clearance casters & limited stock deals, polyurethane, rubber and pneumatic are kinder to tile and finished floors; nylon, ductile iron, cast iron and steel roll easier under heavy loads on smooth concrete.
Rig: swivel and rigid clearance casters & limited stock deals are listed, with total lock brake, side lock brake and top lock brake options.
Heat: among clearance casters & limited stock deals, the highest listed range is up to 800°F on ductile iron; check the temperature field on each listing before oven or hot-room use.

Clearance casters & limited stock deals questions

How much weight can clearance casters & limited stock deals carry?

Single clearance casters & limited stock deals are rated 50 to 2,400 lb; most fall between 150 and 600 lb.

What top plate do clearance casters & limited stock deals use?

Most clearance casters & limited stock deals use 4 x 4-1/2 in. Other plates on clearance casters & limited stock deals: 73 x 73 mm (2-7/8 x 2-7/8) in.

What wheel material is most common on clearance casters & limited stock deals?

Polyurethane leads on clearance casters & limited stock deals, rated 100 to 1,100 lb per caster. Among clearance casters & limited stock deals, rubber is next at 50 to 350 lb.

Are replacement wheels sold for clearance casters & limited stock deals?

Yes. Wheel-only listings for clearance casters & limited stock deals are here, sized 3, 4, 6, 8 and 10 in; match the bore and hub length to your axle.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters