Back to Casters

Steel Chain Hooks · Grade 70 · Clevis Grab Hook · 4,700-11,300 lb

This collection holds Grab Hooks Grab Hooks casters with metal wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection range from 6,600 to 11,300 lb per caster. Metal wheels roll with low effort and handle debris and heat. They are loud and can mark finished floors. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Call or email CasterHQ with the part number from the old unit if you need help matching it. Brakes help on ramps. Check the floor first. Forged steel aisle: forged steel casters. Wheel hub: replacement wheels.

Shop by type

2 types

Wheel = wheel diameter · capacity is per caster.

3 options in this exact size and spec. See all casters by load capacity and mount type › or call 844-439-4335 for a cross-reference.

Hooks listed

Hook Chain size Grade Listed rating
C-CGH-6.6 clevis grab hook 3/8 in 70 6,600 lb
Durabilt clevis cradle grab hook 3/8 in 100 8,800 lb
C-CGH-1/2 clevis grab hook 1/2 in 70 11,300 lb

From product titles and listings [S1].

Matching hook and chain

  • Use a hook of the same size and grade as the chain, or higher. The assembly is only as strong as its weakest part.
  • A clevis hook pins straight onto the end link, so no extra connector is needed.
  • A cradle hook seats the link fully so it is not bent over a narrow throat.
  • Grade 70 is a transport grade for tie-down. Do not use these hooks for overhead lifting.

Grab hook questions

What does a grab hook do?

It catches a chain link and holds it without sliding, so you can shorten a chain or end it.

What sizes are available?

3/8 in in Grade 70 and Grade 100, and 1/2 in in Grade 70.

Can I lift with a Grade 70 grab hook?

No. Grade 70 is for transport tie-down, not overhead lifting.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.

Search