Back to Casters

Hamilton hard tread polyurethane wheels

Custom made to order. All sales final.

Each Hamilton product is custom manufactured for your order (lead time is shown on each product page). Please confirm all specs before checkout, since made-to-order items aren't eligible for returns, exchanges or refunds. Need help? Call 844-439-4335 or email info@casterhq.com and we'll verify fit for you.

This collection holds Hard with polyurethane, UltraGlide polyurethane and Duralast XC polyurethane treads, made to replace worn wheels on carts, dollies, racks, and equipment. Wheels in this collection range from 500 to 10,000 lb per wheel. Wheels in this category range from 2 up to 16 inches in diameter with 1 to 5 in tread widths. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. UltraGlide polyurethane wheels are made to start and roll with low push effort, which helps on long pushes. Duralast XC polyurethane treads are quiet, protect floors, and carry heavy loads with low rolling effort. Match the bore, hub length, diameter, and tread width before you order. Order the axle and spacers if the old ones are worn. Read the listing for the exact wheel size, overall height, and mount shown. Polyurethane aisle: polyurethane casters. Caster hub: heavy duty casters.

Shop by wheel type

4 types

Wheel = wheel diameter · capacity is per wheel.

Hamilton hard tread polyurethane wheels by tread

Tread Core Wheel sizes Rated per wheel Listed temperature Where it fits
Polyurethane Aluminum and Cast iron 3-1/2 to 12 in 500 to 7,800 lb -50°F to 200°F quiet, floor-friendly and long wearing
Cast iron 12 in Not listed -5°F to 160°F heat, chips and heavy loads on rough floors

Ratings are for single wheels of Hamilton hard tread polyurethane wheels, from product fields [S1].

Wheel sizes

Wheel Treads Rated
4 x 2 in polyurethane 750 to 1,200 lb
5 x 2 in polyurethane 900 to 1,360 lb
6 x 2 in polyurethane 1,000 to 2,025 lb
6 x 3 in polyurethane 2,860 to 3,100 lb
8 x 2 in polyurethane 1,000 to 2,800 lb
8 x 3 in polyurethane 3,000 to 4,900 lb
10 x 3 in polyurethane 3,200 to 5,900 lb
12 x 4 in polyurethane 6,800 to 7,800 lb

Choosing Hamilton hard tread polyurethane wheels

  1. Load: divide the loaded weight by three for a four-wheel cart [S2]. Among Hamilton hard tread polyurethane wheels, a 4,550 lb wheel then suits about 13,650 lb, and the strongest at 7,800 lb about 23,400 lb.
  2. Floor: on Hamilton hard tread polyurethane wheels, polyurethane is kinder to tile and finished floors; cast iron rolls easier under heavy loads on smooth concrete.

Hamilton hard tread polyurethane wheels questions

How much weight can Hamilton hard tread polyurethane wheels carry?

Single Hamilton hard tread polyurethane wheels are rated 500 to 7,800 lb; most fall between 1,100 and 4,550 lb.

What wheel material is most common on Hamilton hard tread polyurethane wheels?

Polyurethane leads on Hamilton hard tread polyurethane wheels, rated 500 to 7,800 lb per wheel.

Are complete casters listed with Hamilton hard tread polyurethane wheels?

Yes. Complete casters are on this page too, rated 1,000 to 8,000 lb each; compare the wheel size and bore with your Hamilton hard tread polyurethane wheels before ordering.

Sources

  • [S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
  • [S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

Search