The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

10" x 3" Polyurethane Casters · 1,650-3,333 lb

This collection holds Heavy Duty 1 casters with polyolefin and polyurethane wheels, built for shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection are rated 1,650 lb per caster. Wheels in this category are 10 inches in diameter with a 3 in tread width. Polyolefin is light, low cost, and resists water and many chemicals. It is hard, so it is loud on rough floors. Polyurethane (poly or urethane) treads are quiet, floor safe, and resist water and many chemicals. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Polyolefin aisle: polyolefin casters. Wheel hub: replacement wheels.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

10" x 3" Polyurethane Casters · 1,650-3,333 lb