Hamilton high heat wheels

Custom made to order. All sales final.

Each Hamilton product is custom manufactured for your order (lead time is shown on each product page). Please confirm all specs before checkout, since made-to-order items aren't eligible for returns, exchanges or refunds. Need help? Call 844-439-4335 or email info@casterhq.com and we'll verify fit for you.

These high heat wheels are Hamilton metal and nylon replacement wheels for ovens, autoclaves, and hot process carts. Wheels in this collection range from about 260 to 7,000 lb per wheel on verified titles. The legacy handle says 9,000 lb; active titles on this page top out at 7,000 lb. Diameters run about 3 to 10 in with cast iron, forged steel, stainless, and high-heat nylon. Cast iron covers most mid-capacity titles. Forged steel takes the highest capacity titles listed here. Match bore, hub length, and heat rating before you place your order today. Read the listing for the exact material and temperature mark shown. Confirm the rating on the listing before you buy. Keep the load on the rating printed for that SKU. Verify the SKU matches your old unit. Capacities below are per wheel unless a listing says set. Broader heat aisle: high temperature wheels. Brand aisle: Hamilton casters.

Shop by wheel type

2 types

Wheel = wheel diameter · capacity is per wheel.

Hamilton high heat wheels by tread

Tread	Core	Wheel sizes	Rated per wheel	Listed temperature	Where it fits
Cast iron		3 to 10 in	260 to 2,400 lb	Up to 750°F	heat, chips and heavy loads on rough floors
Nylon		3, 4, 5, 6 and 8 in	560 to 1,400 lb	Up to 550°F	low rolling effort on smooth floors, handles wet areas
Steel	Cast iron	6, 8 and 10 in	2,400 to 5,440 lb	Up to 750°F	heavy loads and track
Stainless steel		3, 4, 5, 6 and 8 in	450 to 1,500 lb	Up to 750°F	washdown and corrosive areas
Forged steel	Steel	4, 5, 6, 8 and 10 in	1,100 to 6,700 lb	Up to 750°F	very high loads and impact
Polyurethane	Stainless steel	5 in	950 lb	-40°F to 180°F	quiet, floor-friendly and long wearing
Rubber	Nylon	4 in	260 lb	Up to 572°F	cushioned and quiet on finished floors

Ratings are for single wheels of Hamilton high heat wheels, from product fields [S1].

Wheel sizes

Wheel	Treads	Rated
4 x 1-3/8 in	stainless steel, rubber and nylon	260 to 700 lb
4 x 2 in	nylon, cast iron and stainless steel	640 to 1,100 lb
5 x 2 in	nylon, cast iron and stainless steel	800 to 1,400 lb
6 x 2 in	nylon, cast iron and stainless steel	960 to 1,600 lb
6 x 3 in	steel, forged steel and cast iron	2,000 to 5,000 lb
8 x 2 in	nylon, stainless steel and cast iron	1,200 to 1,500 lb
8 x 3 in	steel, forged steel and cast iron	2,080 to 6,000 lb
10 x 3 in	cast iron, steel and forged steel	2,080 to 5,000 lb

Choosing Hamilton high heat wheels

Load: divide the loaded weight by three for a four-wheel cart [S2]. Among Hamilton high heat wheels, a 2,400 lb wheel then suits about 7,200 lb, and the strongest at 6,700 lb about 20,100 lb.
Floor: on Hamilton high heat wheels, polyurethane and rubber are kinder to tile and finished floors; cast iron, nylon, steel, stainless steel and forged steel roll easier under heavy loads on smooth concrete.
Heat: among Hamilton high heat wheels, the highest listed range is up to 750°F on cast iron; check the temperature field on each listing before oven or hot-room use.

Related to Hamilton high heat wheels: industrial casters, non-metallic and metallic.

Hamilton high heat wheels questions

How much weight can Hamilton high heat wheels carry?

Single Hamilton high heat wheels are rated 260 to 6,700 lb; most fall between 800 and 2,400 lb.

What wheel material is most common on Hamilton high heat wheels?

Cast iron leads on Hamilton high heat wheels, rated 260 to 2,400 lb per wheel. Among Hamilton high heat wheels, nylon is next at 560 to 1,400 lb.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.
[S2] Preferred Equipment casters and wheels quick guide PDF (prefeq.com): load sizing on one less caster, wheel types and floor notes.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters