Interior Van

This collection holds Interior Van casters with metal wheels, built for shop carts, equipment, and material handling carts that move heavier loads. Casters in this collection range from 833 to 1,466 lb per caster. Wheels in this category are 2 inches in diameter with a 12 in tread width. Flanged and V groove track wheels ride on rail or angle iron track for straight line travel. Metal wheels roll with low effort and handle debris and heat. They are loud and can mark finished floors. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Forged steel aisle: forged steel casters. Wheel hub: replacement wheels.

Shop by type

3 types

Wheel = wheel diameter · capacity is per caster.

Interior van on this page

Type	Widths or sizes	Listed rating	Material
E-track and van hardware	2 in	833 to 870 lb	steel and aluminum
Other			steel
Ratchet strap	2 in	1,466 lb

Summary of interior van from product titles and fields [S1].

Before you order

The rating on each of these interior van is the working load limit for the assembly; add up the limits of every strap on the load and check the total against the securement rules for your trailer.
For interior van, pick the end fitting for the anchor point: flat hooks for flatbed rails, wire or J hooks for stake pockets and frames, D-rings and E-track fittings for van walls.

Related to interior van: interior van ratchet straps, steel bars and E track.

Interior van questions

What ratings are listed for interior van?

Ratings for interior van run 833 to 1,466 lb; e-track and van hardware listings make up the largest group.

What types of interior van are listed?

E-track and van hardware and Ratchet strap.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters