Jerr-Dan Hooks, metal | 3,300 to 5,000 lb

The below capacity ranges indicate the working (dynamic) load that each caster will support. A safety factor should be included in your formula to determine your required load rating per caster.

W/(C-1)=R W is total weight needed to move. C is total number of casters required. R is ideal load rating, with safety factor built in. Divide the total load weight by one less caster than you will use to safely determine load rating.

Jerr-Dan Hooks

This collection holds Jerr-Dan Hooks casters with metal wheels, built for heavy equipment, dies, molds, and plant carts that move very heavy loads. Casters in this collection range from 3,300 to 5,000 lb per caster. Metal wheels roll with low effort and handle debris and heat. They are loud and can mark finished floors. Match plate size, bolt pattern, and overall height before you order. Read the listing for the exact wheel size, overall height, and mount shown. Confirm the load rating printed on the title before you order. Measure the old wheel or caster before you buy. Check the floor type and the heaviest load the cart will carry before you choose. Call or email CasterHQ with the part number from the old unit if you need help matching it. Brakes help on ramps. Check the floor first. Many carts run two swivel and two rigid casters for easy steering. Forged steel aisle: forged steel casters. Wheel hub: replacement wheels.

Hook	Width	Listed rating
H-2JERRDANN Jerr-Dan hook	2 in	3,300 lb
Flat snap hook	2 in	5,000 lb

Hook

Width

Listed rating

H-2JERRDANN Jerr-Dan hook

2 in

3,300 lb

Flat snap hook

2 in

5,000 lb

Jerr-Dan hook questions

What is the rating on the Jerr-Dan hook?

3,300 lb as listed.

What width strap fits?

2 in webbing.

Jordan Wilson, CasterHQ · reviewed October 20, 2026 · 844-439-4335 · info@casterhq.com

Sources

[S1] CasterHQ product fields (rated load, diameter, width, wheel and core material, temperature range, mount) and product descriptions for the items on this page, pulled October 20, 2026.

BHP: 1-3/4″ × 2-7/8″, slotted to 3″

BHP: 1-3/4″ × 2-15/16″ slotted to 2-3/8″ × 3-3/8″

BHP: 2-5/8” X 3-5/8” (Slotted to 3” x 3”)

BHP: 2-7/16" x 4-15/16" slotted to 3-3/8" x 5-1/4"

(3″ Wide Casters), Industry-Standard

BHP: 3-3/8" x 5-1/4" slotted to 4-1/8" x 6-1/8"

BHP: 4-1/8" x 6" slotted to 4-1/2" x 6-1/8"

View All • 21 Plate Sizes

Plate Casters

Stem Casters

Stainless Casters

Ergonomic Casters

Leveling Casters

Jerr-Dan Hooks

Hooks on this page

Before you order

Jerr-Dan hook questions

Sources